It is not stored in a parameter but memorized as the frequency setting value after acceleration by the acceleration sign

The inverter restart operation is disabled at turn-OFF of the CS signal while a value other than "9999" (with restart) i

1. It depends on how Pr.338 (Communication operation command source) and Pr.339 (Communication speed command source) are

The FR-A7NC is designed for the FR-A700, FR-F700, and FR-F700P.The FR-A7NC E kit is designed for the FR-E700 with the de

The way to monitor the output current and read parameters via CC-Link is identical in all operation modes.

Yes, you can set all of the three relay contacts to fault contacts.Set Pr.320 (RA1 output selection), 321 (RA2 output se

Use the FR-A740. Basically, select the capacity according to the calculation result of "rated inverter output current ?

The start commands cannot be input from both sources simultaneously because the operation command source is specified.Yo

Set Pr.79 (Operation mode) to "3" and Pr.161 (Frequency setting/key lock operation selection) to "1".

No problem. The inverter actually occupies the reserved bits and does not use them.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-F700

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-F700 ]

271-280 of Total 296

prev 28 / 30page next

Frequency setting

It is not stored in a parameter but memorized as the frequency setting value after acceleration by the acceleration signal.You can also choose whether or not... More Details >>
- No：21733
- Release Date：2018/08/22 16:29
Automatic restart after instantaneous power failure

The inverter restart operation is disabled at turn-OFF of the CS signal while a value other than "9999" (with restart) is set in Pr.57. The terminals CS and ... More Details >>
- No：21255
- Release Date：2018/08/22 16:26
CC-Link

1. It depends on how Pr.338 (Communication operation command source) and Pr.339 (Communication speed command source) are set.2. The external terminal reset i... More Details >>
- No：21838
- Release Date：2018/08/22 16:29
CC-Link

The FR-A7NC is designed for the FR-A700, FR-F700, and FR-F700P.The FR-A7NC E kit is designed for the FR-E700 with the dedicated cover. (Only the dedicated co... More Details >>
- No：21830
- Release Date：2018/08/22 16:29
CC-Link

The way to monitor the output current and read parameters via CC-Link is identical in all operation modes.　 More Details >>
- No：21872
- Release Date：2018/08/22 16:29
FR-A7AR E kit (Relay output function)

Yes, you can set all of the three relay contacts to fault contacts.Set Pr.320 (RA1 output selection), 321 (RA2 output selection), and 322 (RA3 output selecti... More Details >>
- No：21712
- Release Date：2018/08/22 16:29
Model selection

Use the FR-A740. Basically, select the capacity according to the calculation result of "rated inverter output current ? rated motor current × 1.1". More Details >>
- No：21244
- Release Date：2018/08/22 16:26
CC-Link

The start commands cannot be input from both sources simultaneously because the operation command source is specified.You can switch the command source as ne... More Details >>
- No：21828
- Release Date：2018/08/22 16:29
Operation method

Set Pr.79 (Operation mode) to "3" and Pr.161 (Frequency setting/key lock operation selection) to "1". More Details >>
- No：21249
- Release Date：2018/08/22 16:26
CC-Link

No problem. The inverter actually occupies the reserved bits and does not use them. More Details >>
- No：21890
- Release Date：2018/08/22 16:29

271-280 of Total 296

Inquiries

page top