If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the fre

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communicati

Set Pr.340 (Communication startup mode selection) to other than "0".Also, set Pr.79 (Operation mode) to "0", "2", or "6"

Since Pr.125 (Terminal 2 frequency setting gain frequency) is initially set to 60 Hz, change it to 85 Hz.

Set Pr.125 (Terminal 2 frequency setting gain frequency) = "90 Hz".This changes the frequency with the potentiometer tur

You can connect up to three inverters to a single external frequency setting potentiometer to control them.

It is not switched. The frequency at the fault saved in the faults history is always displayed in frequency [Hz].

For countermeasures against the open/close surge of the MC (magnetic contactor). Insert a diode not to apply 27 VDC or m

Turn ON and OFF the RES signal to enable the inverter-driven operation.

Set Pr.71 (Applied motor), Pr.80 (Motor capacity), Pr.81 (Number of motor poles), and Pr.800 (Control method selection).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-F700

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-F700 ]

81-90 of Total 296

prev 9 / 30page next

CC-Link

If you are using CC-Link just to monitor the inverter and using the analog signal and multi-speed setting to set the frequency, you need to input them extern... More Details >>
- No：21900
- Release Date：2018/08/22 16:29
CC-Link

You can start/stop operation, set the frequency, read/write parameters, and monitor the inverter via CC-Link communication. More Details >>
- No：21901
- Release Date：2018/08/22 16:29
CC-Link

Set Pr.340 (Communication startup mode selection) to other than "0".Also, set Pr.79 (Operation mode) to "0", "2", or "6".Powering the inverter on automatical... More Details >>
- No：21903
- Release Date：2018/08/22 16:30
Frequency setting

Since Pr.125 (Terminal 2 frequency setting gain frequency) is initially set to 60 Hz, change it to 85 Hz. More Details >>
- No：21907
- Release Date：2018/08/22 16:30
Frequency setting

Set Pr.125 (Terminal 2 frequency setting gain frequency) = "90 Hz".This changes the frequency with the potentiometer turned to the maximum position (at 5 V i... More Details >>
- No：21909
- Release Date：2018/08/22 16:30
Frequency setting

You can connect up to three inverters to a single external frequency setting potentiometer to control them.　　 More Details >>
- No：21917
- Release Date：2018/08/22 16:30
Rotation speed display

It is not switched. The frequency at the fault saved in the faults history is always displayed in frequency [Hz]. More Details >>
- No：21180
- Release Date：2018/08/22 16:26
Electronic bypass function

For countermeasures against the open/close surge of the MC (magnetic contactor). Insert a diode not to apply 27 VDC or more to the open collector terminal of... More Details >>
- No：21188
- Release Date：2018/08/22 16:26
Electronic bypass function

Turn ON and OFF the RES signal to enable the inverter-driven operation. More Details >>
- No：21190
- Release Date：2018/08/22 16:26
Changing the control method

Set Pr.71 (Applied motor), Pr.80 (Motor capacity), Pr.81 (Number of motor poles), and Pr.800 (Control method selection). More Details >>
- No：21245
- Release Date：2018/08/22 16:26

81-90 of Total 296

Inquiries

page top