The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Ele

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L

Since a large load is applied to the motor when the electromagnetic clutch turns on, overcurrent may occur if the load i

To use an inverter using the external contact coast to stop (to shut off the inverter's output), short-circuit the termi

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since i

The FR-A500 series that is the successor of the FR-A200E series has a function similar to output current detection of th

- The installation size is compatible for the following capacities. Compatible: 200 V class 90K or lower, 400 V class 7.

The internal processing speed is not published. The analog input specifications are as follows: FR-A500???1/4000FR-E500?

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in

For the combination of the FR-A500 + FR-A5NC, Pr.338 and Pr.339 are used to specify whether the external signals or CC-L

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A500

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FREQROL-A500

Common(1)

FAQ within [ FREQROL-A500 ]

81-90 of Total 123

prev 9 / 13page next

Reset command during operation

The reset signal does not damage the inverter.It seems that the inverter went faulty due to other reasons.Mitsubishi Electric FA Center can inspect the inver... More Details >>
- No：22065
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
FR-A800

No. Check the parameter setting of the A500(L), and then adjust the parameter setting of the A800 to those of the A500(L). For the details, refer to the repl... More Details >>
- No：21108
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-A500
Clutch connection of load

Since a large load is applied to the motor when the electromagnetic clutch turns on, overcurrent may occur if the load is heavy. To ensure that the rated cur... More Details >>
- No：21955
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Coasting operation of the inverter

To use an inverter using the external contact coast to stop (to shut off the inverter's output), short-circuit the terminals MRS and SD.For CC-Link operation... More Details >>
- No：22003
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Power supply phase loss

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since it loses the control power supply.2. W... More Details >>
- No：22010
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Output current detection

The FR-A500 series that is the successor of the FR-A200E series has a function similar to output current detection of the FR-E500. Consider using the FR-A500... More Details >>
- No：21453
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-A200
FR-A800

- The installation size is compatible for the following capacities. Compatible: 200 V class 90K or lower, 400 V class 7.5K or lower and 18.5K to 280K- The in... More Details >>
- No：21110
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800 , FREQROL-A500
Analog signal resolution

The internal processing speed is not published. The analog input specifications are as follows: FR-A500???1/4000FR-E500???1/1000MR-H???1/4000 More Details >>
- No：21550
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
12-bit digital input

You can set both the BCD code and binary code inputs within the range from 0 to 400 Hz.You can set the bias and gain in 0.01 Hz units.For BCD input, when the... More Details >>
- No：21945
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Plug-in Options , FREQROL-A500
External wiring for CC-Link operation

For the combination of the FR-A500 + FR-A5NC, Pr.338 and Pr.339 are used to specify whether the external signals or CC-Link commands are used to set the runn... More Details >>
- No：21973
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500

81-90 of Total 123

Inquiries

page top