The inverter itself does not have a function to detect the rotation angle and change the velocity accordingly. Therefore

When the inverter start signal is input, the inverter starts outputting from the starting frequency. And then, it gradua

1. Stall prevention operation works when the inverter's output current exceeds the value set with Pr.22.In this case, it

When the programmable controller power is turned OFF while the inverter is in the PLC link operation mode, a communicati

If the output current is close to 25% of the rated current, output phase loss may occur when one or two phases of three

1. By setting Pr.158 (Terminal AM function selection) to "21" (Reference voltage output), 10 V is output from the termin

The inverter has the current limit function. This automatically controls the frequency so that the preset current value

Refer to the Technical Sheet No.23 (Capacity Selection and Continuous Operation) for reference for selection. Optional c

The inverter uses PWM control to change the output voltage and frequency to vary the motor speed. PWM stands for Pulse W

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since i

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A500

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FREQROL-A500

Common(1)

FAQ within [ FREQROL-A500 ]

1-10 of Total 119

prev 1 / 12page next

Angular velocity change control

The inverter itself does not have a function to detect the rotation angle and change the velocity accordingly. Therefore, to implement required control, it i... More Details >>
- No：22086
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-V200
Stall prevention operation

When the inverter start signal is input, the inverter starts outputting from the starting frequency. And then, it gradually raises the frequency for accelera... More Details >>
- No：21413
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Stall prevention

1. Stall prevention operation works when the inverter's output current exceeds the value set with Pr.22.In this case, it is considered that the current did n... More Details >>
- No：22067
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Resetting inverter after restoring from power failure

When the programmable controller power is turned OFF while the inverter is in the PLC link operation mode, a communication error occurs and the inverter trip... More Details >>
- No：21417
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Plug-in Options , FREQROL-A500
Output phase loss alarm

If the output current is close to 25% of the rated current, output phase loss may occur when one or two phases of three phases go below 25%.Therefore, when a... More Details >>
- No：22052
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Terminal AM calibration

1. By setting Pr.158 (Terminal AM function selection) to "21" (Reference voltage output), 10 V is output from the terminal AM.2. Read Pr.901 in the PU operat... More Details >>
- No：21936
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-F500 , FREQROL-A200 , FREQROL-A100
Automatic overload control of inverter

The inverter has the current limit function. This automatically controls the frequency so that the preset current value may not be exceeded. (Note that the m... More Details >>
- No：21409
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-F500 , FREQROL-E500 , FREQROL-S500
Calculation of inverter acceleration and deceleration time

Refer to the Technical Sheet No.23 (Capacity Selection and Continuous Operation) for reference for selection. Optional capacity selection software is also pr... More Details >>
- No：22097
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Soft-PWM

The inverter uses PWM control to change the output voltage and frequency to vary the motor speed. PWM stands for Pulse Width Modulation. Voltage is chopped i... More Details >>
- No：21549
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Power supply phase loss

The following is the case for the FREQROL-A500 series:1. When the R phase or S phase is lost, the inverter stops since it loses the control power supply.2. W... More Details >>
- No：22010
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500

1-10 of Total 119

Inquiries

page top