Remove the parameter unit FR-PU03 and install there. (The installation dimensions of the FR-CU03 are the same as the FR-

Pr.59 is available in the products manufactured in October 1995 or later. Therefore, it cannot be read from the products

This is because when the inverter restarts while the motor is coasting, an overcurrent trip can occur during the restart

The fan of the FR-A024 cannot be replaced by the customer. Mitsubishi Electric System & Service will replace it, so

Almost same control method. This control also performs vector calculation and divides the inverter's output current into

When the wiring between the inverter and motor is long, surge voltage occurs at the terminal of the motor.This surge vol

You can use it with the FR-A200 (E) and FR-A100 (E) series. (Note) Use the connection cable (option). You cannot use it

When synchronously operating two motors, you need to detect speed from both motors. Each inverter is controlled based on

1. How much is the sensitivity current? When the sum of the three-phase output current of the inverter reaches approxima

An error may have occurred due to the rise of the main circuit voltage of the inverter caused by a power surge. Check fo

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A024

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A024 ]

31-40 of Total 40

prev 4 / 4page next

Installation of new serial communication unit FR-CU03

Remove the parameter unit FR-PU03 and install there. (The installation dimensions of the FR-CU03 are the same as the FR-PU.) You can read and write parameter... More Details >>
- No：21617
- Release Date：2018/08/22 16:28
FR-A024

Pr.59 is available in the products manufactured in October 1995 or later. Therefore, it cannot be read from the products manufactured before October 1995. More Details >>
- No：21170
- Release Date：2018/08/22 16:26
What happens if reset occurs during operation?

This is because when the inverter restarts while the motor is coasting, an overcurrent trip can occur during the restart process. However, the recent types o... More Details >>
- No：21477
- Release Date：2018/08/22 16:27
Can I replace the cooling fan alone?

The fan of the FR-A024 cannot be replaced by the customer. Mitsubishi Electric System & Service will replace it, so contact us to order it. More Details >>
- No：22001
- Release Date：2018/08/22 16:30
General-purpose magnetic flux control

Almost same control method. This control also performs vector calculation and divides the inverter's output current into an excitation current and into a tor... More Details >>
- No：21620
- Release Date：2018/08/22 16:28
Inverter drive of 400 V class motor

When the wiring between the inverter and motor is long, surge voltage occurs at the terminal of the motor.This surge voltage deteriorates insulation of the m... More Details >>
- No：21926
- Release Date：2018/08/22 16:30
Parameter unit FR-PU03

You can use it with the FR-A200 (E) and FR-A100 (E) series. (Note) Use the connection cable (option). You cannot use it with the FR-Z and FR-U series (except... More Details >>
- No：21615
- Release Date：2018/08/22 16:28
Synchronous operation of two motors

When synchronously operating two motors, you need to detect speed from both motors. Each inverter is controlled based on this speed detection signal. As an e... More Details >>
- No：21540
- Release Date：2018/08/22 16:28
Output side earth (ground) fault overcurrent protection

1. How much is the sensitivity current? When the sum of the three-phase output current of the inverter reaches approximately 70% of the inverter rated curren... More Details >>
- No：21394
- Release Date：2018/08/22 16:27
"OV3" occurs during an inverter stop.

An error may have occurred due to the rise of the main circuit voltage of the inverter caused by a power surge. Check for the power supply voltage. If the ca... More Details >>
- No：21383
- Release Date：2018/08/22 16:27

31-40 of Total 40

Inquiries

page top