Yes. Set parameters as below.For FR-E500Set Pr.79 =3, and Pr.146= 0.Multi-speed is prioritized.For FR-S500Set Pr.79 = 3,

The brake unit and its resistor FR-S520-0.4K to 3.7K are available.Mitsubishi Electric FA Global Website also explains s

If the parameters related to the output voltage are not changed from the initial setting, it is unlikely that the output

The operation panel of the FR-S500 is not detachable.For the FR-S500-○○K-R (compatible with RS-485 communication), you c

With your setting, since Pr.60 assigns the OH function to the terminal PL, and terminals RL and SD are open, an external

The NC contact does not open when the power supply is cut off whether the inverter is operating or ceased.When the input

Using the inverter's input terminal, you can use up to 15 speeds.This function is supported by the current 500 series pr

Installing the high power factor converter brings the power factor improving effect of 99% or higher.Therefore, when the

No. Although the carrier frequency increases or decreases the switching count, the switching speed is the OFF-to-ON spee

The inverter has the current limit function. This automatically controls the frequency so that the preset current value

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-S500

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-S500 ]

1-10 of Total 11

prev 1 / 2page next

Speed 2 operation with potentiometer on operation panel

Yes. Set parameters as below.For FR-E500Set Pr.79 =3, and Pr.146= 0.Multi-speed is prioritized.For FR-S500Set Pr.79 = 3, and Pr.53 = 1.Multi-speed is priorit... More Details >>
- No：21963
- Release Date：2018/08/22 16:30
Can I use a brake resistor with the FR-S500?

The brake unit and its resistor FR-S520-0.4K to 3.7K are available.Mitsubishi Electric FA Global Website also explains so.(Note that the GZG GRZG discharging... More Details >>
- No：21970
- Release Date：2018/08/22 16:30
When motor current is large

If the parameters related to the output voltage are not changed from the initial setting, it is unlikely that the output current at 55 Hz and 60 Hz is double... More Details >>
- No：21983
- Release Date：2018/08/22 16:30
Separation of operation panel

The operation panel of the FR-S500 is not detachable.For the FR-S500-○○K-R (compatible with RS-485 communication), you can install the FR-PU04 on the enclosu... More Details >>
- No：22058
- Release Date：2018/08/22 16:30
Current input switching operation

With your setting, since Pr.60 assigns the OH function to the terminal PL, and terminals RL and SD are open, an external protection error occurs. (It does no... More Details >>
- No：21975
- Release Date：2018/08/22 16:30
Fault contact state when input side power supply is cut off

The NC contact does not open when the power supply is cut off whether the inverter is operating or ceased.When the input side power supply is cut off, the DC... More Details >>
- No：21958
- Release Date：2018/08/22 16:30
Speed 15 operation

Using the inverter's input terminal, you can use up to 15 speeds.This function is supported by the current 500 series products (A500, F500, E500, and S500).U... More Details >>
- No：21947
- Release Date：2018/08/22 16:30
Power factor improving effect by option

Installing the high power factor converter brings the power factor improving effect of 99% or higher.Therefore, when the high power factor converter is used,... More Details >>
- No：22020
- Release Date：2018/08/22 16:30
Surge voltage of 400 V inverter

No. Although the carrier frequency increases or decreases the switching count, the switching speed is the OFF-to-ON speed of the IGBT element of the inverter... More Details >>
- No：21401
- Release Date：2018/08/22 16:27
Automatic overload control of inverter

The inverter has the current limit function. This automatically controls the frequency so that the preset current value may not be exceeded. (Note that the m... More Details >>
- No：21409
- Release Date：2018/08/22 16:27

1-10 of Total 11

Inquiries

page top