How to use PWM output of LCPU built-in I/O

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction". More Details >>

Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>

Insufficient memory capacity for sequence programs

It cannot be increased by installing an SRAM card. The size of executable program depends on the program memory size of the CPU. Use another CPU of which p... More Details >>

Error in simulation in GX Works2

This problem can be workarounded by upgrading software products made by other companies to the latest version or uninstalling them.For more details, refer to... More Details >>

Unable to communicate via USB connection

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized. More Details >>

Regarding supported programming languages

The following programming languages are supported. ・Ladder diagram (LD) ・Structured text (ST) ・Function block diagram (FBD/LD) More Details >>

Regarding CC-Link IE field CPU module status during communication error occurs on CC-Link IE Field Network Basic

CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run. When the CC-Link IE Field Network i... More Details >>

Regarding the differences between the FX5-2HC/ES and the conventional FX3U-2HC input formats

The FX5-2HC/ES supports differential line drivers (5 V) only. The FX3U-2HC supports open collectors (24 V/12 V/5 V) and differential line drivers (5 V). ... More Details >>

Regarding the communication speed of FX5-CCLGN-MS

The FX5-CCLGN-MS firmware version 1.010 or later supports a communication speed setting of 100 Mbps. More Details >>

Regarding communication data code for SLMP communication

It can not be set for each connection. More Details >>