Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

Up to 4 connections can be opened.

The thickness of wire should be 2 square millimeters or more, and class D grounding (grounding resistance: 100 Ω or less

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligen

A memory cassette has a PROTECT switch to prevent a program from being overwritten in EEPROM and flash ROM. When this s

The accuracy is within ±45 seconds/month (ambient temperature: 25ºC).

Some of the F2-40BL batteries installed to a programmable controller are mounted on the printed circuit board. The separ

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Controllers MELSEC(1637)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(578)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)
Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

591-600 of Total 1055

prev 60 / 106page next

Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit
MELSOFT connection of the FX3U-ENET-ADP Ethernet communication special adapter

Up to 4 connections can be opened. More Details >>
- No：24903
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Network/Communication
Thickness of ground wire

The thickness of wireshould be2 square millimeters or more, andclass D grounding (grounding resistance: 100 Ω or less) should be performed. More Details >>
- No：24899
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Main Unit
Setting of the FX3U-ENET-ADP Ethernet communication special adapter

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.　 More Details >>
- No：24875
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Network/Communication
Connecting local stations to the FX3U-16CCL-M

No, local stations cannot be connected to the FX3U-16CCL-M. Remote I/O stations, remote device stations, and intelligent device stations can be connected to... More Details >>
- No：24791
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Network/Communication
Writing a program to a memory cassette

A memory cassette has a PROTECT switch to prevent a program from being overwritten in EEPROM and flash ROM. When this switch is on, writing of the program i... More Details >>
- No：24788
- Release Date：2019/02/28 09:07
- Category： MELSEC-F Series , Accessories
Clock function accuracy of the MELSEC-F series

The accuracy is within ±45 seconds/month (ambient temperature: 25ºC). More Details >>
- No：24778
- Release Date：2019/02/27 15:57
- Category： MELSEC-F Series , Main Unit
External appearance of the F2-40BL

Some of the F2-40BL batteries installed to a programmable controller are mounted on the printed circuit board. The separately available F2-40BL batteries (sp... More Details >>
- No：24771
- Release Date：2019/02/27 15:17
- Category： MELSEC-F Series , Accessories

591-600 of Total 1055

Inquiries

page top