Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit,

Files are stored as sample comments when GX Developer is installed. Read a comment from the project data of sample comme

Receiving data overwrites the buffer memory data. Writing 0 with a program can be performed but is unnecessary as the da

The PCPU READY complete flag (SM500) turns ON when no error is detected in the fixed parameters, servo parameters, and l

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC pro

Error 093EH (SSCNET communication error) occurs when erroneous data is received from servo amplifier. [When the servo p

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

Yes, they are independent common terminals.

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

711-720 of Total 1110

prev 72 / 111page next

Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>
- No：22775
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Sample comments for special relays/registers

Files are stored as sample comments when GX Developer is installed. Read a comment from the project data of sample comments to a user project and copy a port... More Details >>
- No：22837
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Clearing data in the QJ71C24N's receiving area buffer memory

Receiving data overwrites the buffer memory data. Writing 0 with a program can be performed but is unnecessary as the data is overwritten. More Details >>
- No：23009
- Release Date：2018/09/03 17:31
- Category： Network related products
PCPU READY complete flag (SM500)

The PCPU READY complete flag (SM500) turns ON when no error is detected in the fixed parameters, servo parameters, and limit switch output data, which are ch... More Details >>
- No：23564
- Release Date：2018/09/14 15:09
- Category： Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU
Speed change during operation

Specify the target axes during operation, and execute the following speed change request instruction. (1) Motion SFC program/Motion program Speed change requ... More Details >>
- No：23573
- Release Date：2018/09/14 15:09
- Category： Q17nDCPU , Q170MCPU
Warning 093EH

Error 093EH (SSCNET communication error) occurs when erroneous data is received from servo amplifier. [When the servo parameter "[PA14] Rotation direction s... More Details >>
- No：23615
- Release Date：2018/09/14 15:09
- Category： RD77MS , RD77GF , FX5SSC
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Terminal layout on the output side of the FX3U-16MR/ES

Yes, they are independent common terminals. More Details >>
- No：24955
- Release Date：2019/04/18 14:23
- Category： MELSEC-F Series , Main Unit
Regarding Open/Close Socket Communications

No need. More Details >>
- No：39288
- Release Date：2023/02/13 15:36
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding program execution using SD Memory Cards

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S CPU module, you need to install an a... More Details >>
- No：39311
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , Option , CPU Module

711-720 of Total 1110

Inquiries

page top