The station number setting is not required for non-protocol communication.

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

1. Right-click the file name of a device comment to be copied, and select "Copy" from the menu.2. Right-click the file n

D8030 for VR1, and D8031 for VR2.

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

An expansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.)

FX5-4AD and FX5-4DA are intelligent function Modules. ・Connect to the right side of the CPU Module. ・Control via buffer

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "

Power off and on the programmable controller again after the communication setting is changed.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

901-910 of Total 1123

prev 91 / 113page next

Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
How to copy a comment in GX Works2

1. Right-click the file name of a device comment to be copied, and select "Copy" from the menu.2. Right-click the file name of a device comment to which the ... More Details >>
- No：22939
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Built-in variable analog potentiometers of the FX3G series

D8030 for VR1, and D8031 for VR2. More Details >>
- No：24769
- Release Date：2019/02/27 15:01
- Category： MELSEC-F Series , Main Unit , Analog Control
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
Connecting special adapters to FX3U series

Anexpansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.) More Details >>
- No：24934
- Release Date：2019/04/18 14:23
- Category： MELSEC-F Series , Main Unit , I/O Extension
Regarding differences between Analog Module and Analog Adapters

FX5-4AD and FX5-4DA are intelligent function Modules. ・Connect to the right side of the CPU Module. ・Control via buffer memory (BFM). ・It also supports ... More Details >>
- No：44347
- Release Date：2024/03/27 15:21
- Category： MELSEC iQ-F Series , Analog
Regarding compatible version of CANopen communication function for PDO communication

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/FX5UC CPU module ・・・1.260 or later ... More Details >>
- No：44473
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
I/O assignment of PLC parameters with GX Works3

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "System Parameter". <Setting fr... More Details >>
- No：22475
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:42
- Category： MELSEC iQ-R Series
Reflecting the changes in the communication setting

Power off and on the programmable controller again after the communication setting is changed. More Details >>
- No：25006
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Engineering Software , Main Unit

901-910 of Total 1123

Inquiries

page top