From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can

Yes, you can. Select [Project] -> [Import file] -> [Import from xxxx format file] and specify a project file.

Minor error 197AH (Home position return zero not passed) occurs in the following case:"[St.1066] zero pass" is OFF when

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check cu

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations and intelligent device stati

You can check the processing time and scan time of the program currently being executed in "Program List Monitor". [Onl

Select "Project" -> "Export to GX Developer Format File" from the menu of GX Works2 to save the project in the format

No, the time cannot be changed during operation. (Note): The following is the modules that support the acceleration/dec

A battery is consumed regardless of the on/off state of the programmable controller. Refer to the User's Manual (Hardwar

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

931-940 of Total 1123

prev 94 / 113page next

Regarding the error history

From the following menu of GX Works3: [Diagnostics]→[Module Diagnostics(CPU Diagnostics)] the event history function can be found. The event history can dis... More Details >>
- No：22305
- Release Date：2018/08/30 13:55
- Update：2023/02/13 11:37
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Can I open a program created with GX Developer in GX Works2?

Yes, you can. Select [Project]-> [Import file]-> [Import from xxxx format file] and specify a project file. More Details >>
- No：22957
- Release Date：2018/09/03 17:31
- Update：2018/09/25 12:13
- Category： Engineering Software
Minor error 197AH

Minor error 197AH (Home position return zero not passed) occurs in the following case:"[St.1066] zero pass" is OFF when the re-movement to the home position ... More Details >>
- No：23560
- Release Date：2018/09/14 15:09
- Category： RnMTCPU
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the connection configuration of FX5-CCL-MS

Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations andintelligent device stationscan be connected. More Details >>
- No：22316
- Release Date：2018/08/30 13:55
- Update：2023/07/03 17:19
- Category： MELSEC iQ-F Series , Network/Communication
How to check the scan time with GX Works3

You can check the processing time and scan time of the program currently being executed in "Program List Monitor". [Online] -> [Monitor] -> [Program... More Details >>
- No：22458
- Release Date：2018/09/03 17:28
- Update：2018/09/19 11:51
- Category： MELSEC iQ-R Series
How to open GX Works2 projects in GX Developer

Select "Project" -> "Export to GX Developer Format File" from the menu of GX Works2 to save the project in the format that can be opened in GX Developer. More Details >>
- No：22514
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:40
- Category： MELSEC-Q Series
Acceleration/deceleration time change

No, the time cannot be changed during operation. (Note): The following is the modules that support the acceleration/deceleration change function. • Q17nDSCP... More Details >>
- No：23570
- Release Date：2018/09/14 15:09
- Category： Q17nDCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Battery consumption while the programmable controller is powered on

A battery is consumed regardless of the on/off state ofthe programmable controller. Refer to the User's Manual (Hardware Edition) for the module used, and r... More Details >>
- No：24687
- Release Date：2019/02/22 11:44
- Update：2019/02/22 15:22
- Category： MELSEC-F Series , Main Unit , Accessories

931-940 of Total 1123

Inquiries

page top