Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CP

It will. It is treated the same as an intelligent module, so it occupies 8 I/O points. The safety input expansion module

No, they cannot be connected. Connect the units having the same power supply type.

1. Data backup using an optional battery Built-in RAM data and clock data of a programmable controller are held by usin

The LCPU error code 4116 is displayed when a built-in I/O instruction that is disabled in the parameter setting is execu

This function allows you to select the digital value to perform D/A conversion from the following three patterns dependi

The station number setting is not required for non-protocol communication.

Check that the RST instruction of the high-speed counter is not executed while the program is running. For the high-spee

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

91-100 of Total 1023

prev 10 / 103page next

Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding automatic transfer of Data Logging Files

Data logging file transfer (FTP server auto transfer) is supported with the following firmware versions. ・FX5U/FX5UC CPU Module Ver. 1.300 or later ・FX5U... More Details >>
- No：44334
- Release Date：2024/03/20 13:30
- Category： MELSEC iQ-F Series , CPU Module
Regarding number of input/output points when adding safety extension module

It will. It is treated the same as an intelligent module, so it occupies 8 I/O points. The safety input expansion module FX5-SF-8DI4 does not occupy the numb... More Details >>
- No：39314
- Release Date：2023/01/12 16:54
- Category： MELSEC iQ-F Series , CPU Module , Safety Control
Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>
- No：25008
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , Main Unit
Types of data backup methods (FX3G series)

1. Data backup using an optional battery 　Built-in RAM data and clock data of a programmable controller are held by using an optional battery. 　The life of... More Details >>
- No：24701
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Remedy for LCPU error "4116"

The LCPU error code 4116 is displayed when a built-in I/O instruction that is disabled in the parameter setting is executed. Check for the parameter settings... More Details >>
- No：22807
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Regarding the HOLD/CLEAR function of the built-in analog output

This function allows you to select the digital value to perform D/A conversion from the following three patterns depending on the operating status of the CPU... More Details >>
- No：39289
- Release Date：2023/01/12 16:51
- Category： MELSEC iQ-F Series , CPU Module , Analog
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Counting of a built-in high-speed counter

Check that the RST instruction ofthe high-speed counter is not executed whilethe program is running. Forthe high-speed counter which supports the external r... More Details >>
- No：24787
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Engineering Software , Main Unit

91-100 of Total 1023

Inquiries

page top