Assigning X and Y signals of AJ65SBTB1-32DT

X and Y assignments are as follows.- X0 to XF- Y10 to Y1F More Details >>

Difference between standard inputs A06 to B11 and high-speed inputs A12 to B20 of LCPU built-in I/O function

The minimum input response times are different. The minimum input response time is 100 microseconds for standard inputs, and 10 microseconds for high-speed i... More Details >>

RS-232 adapter cable disconnection prevention

Yes. More Details >>

Causes to why SD1286 does not turn on during socket communication of LCPU

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L series CPU. - In the TCP fixed-length... More Details >>

Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>

Versions of built-in Ethernet port LCPU compatible with SNTP function

The initial version and subsequent versions of L series CPU support the SNTP function. More Details >>

LCPU internal clock synchronization

Use the time setting function to synchronize the internal clock. More Details >>

LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>

Ethernet system configuration of a redundant system

The following figure shows the basic configuration. When a control system Ethernet module is faulty or disconnected, the system is switched at a disco... More Details >>

Detecting the connection between a built-in Ethernet port QCPU and hub

You can check the connection to the hub with bit 10 of the special register SD1288. When bit 10 of the SD1288 is on, the QCPU is in connection with the hub. More Details >>