For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please ref

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

It means an instruction that handles BIN 16 bit and BIN 32 bit unsigned data. Example:ADD _ U

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an e

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to chec

Check whether the lamp is back to normal after disconnecting the wiring of the "24V" (service power supply) terminal. If

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited.

The file register is used for storing predetermined values (such as specification values for product inspection). Other

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

101-110 of Total 1023

prev 11 / 103page next

Regarding simulation function using GX Works3

For FX5U/FX5UC CPU modules, GX Works3 Ver. 1.025B or later is supported, and for FX5UJ CPU modules, GX Works3 Ver. 1.065T or later is supported. FX5S CPU mo... More Details >>
- No：22327
- Release Date：2018/08/30 13:55
- Update：2023/02/15 12:56
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
How to set battery-less operation(FX3U/FX3UC)

To perform battery-less operation in the FX3U/FX3UC series, set parameters using GX Works2(or GX Developer). Please refer to the following manual for furt... More Details >>
- No：22277
- Release Date：2018/08/30 13:48
- Update：2019/02/19 08:47
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding "_ U" in Application Instruction

It means an instruction that handles BIN 16 bit and BIN 32 bit unsigned data. Example:ADD _ U More Details >>
- No：39295
- Release Date：2023/02/13 16:37
- Category： MELSEC iQ-F Series , CPU Module
Regarding the built-in analog input/output function

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an external resister is connected, the m... More Details >>
- No：22313
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:47
- Category： MELSEC iQ-F Series , CPU Module , Analog
How to reset M8004 (Error occurrence)

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to check the error In the FX3S/FX3G/FX3GC/FX... More Details >>
- No：22280
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
The power supply lamp of a running programmable controller suddenly turned off or flashes

Check whether the lamp is back to normalafter disconnecting the wiring of the "24V" (service power supply) terminal. Ifthe lamp is back to normal,the servic... More Details >>
- No：22267
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:53
- Category： MELSEC-F Series , Main Unit
Input wiring (FX3 series)

For the sink input, the "S/S" terminal and the "24V" terminal are needed to be short-circuited. More Details >>
- No：22263
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Differences between the file register and other registers

The file register is used for storing predetermined values (such as specification values for product inspection). Other registers are used as a temporary st... More Details >>
- No：22256
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding program execution using SD Memory Cards

It's possible. Use the boot operation function of the SD memory card. *To use the boot operation function with the FX5S CPU module, you need to install an a... More Details >>
- No：39311
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , Option , CPU Module

101-110 of Total 1023

Inquiries

page top