Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =.

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM

GX Configurator-MB does not need to be purchased. Parameters can be set using GX Works2 alone.

Errors can be checked with the following error detection signals and buffer memory areas corresponding to each axis.- Ax

In the "Reference/Reflection Target for Device Comment" window, switch the "Specify the Reference/Reflection" from "Glob

Both of them need to be grounded. They can be shorted and grounded as one cable.

Launch GX Works2, select [Project] -> [Open Other Project], and read the data created with GX Developer. Copy the co

In GX Works3, [Tools] - [Options] - [Conversion] - [Online Program Change], set "Execute Online Program Change in Conver

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

121-130 of Total 1023

prev 13 / 103page next

Regarding comparison of Strings

Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =. More Details >>
- No：39355
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
GX Works2's compatibility with the ACPU modules

GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM of GX Works2.For the installation pr... More Details >>
- No：22873
- Release Date：2018/09/03 17:30
- Category： Engineering Software
GX Configurator-MB for the MODBUS(R) interface module

GX Configurator-MB does not need to be purchased. Parameters can be set using GX Works2 alone. More Details >>
- No：22701
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to check errors with error codes of QD75

Errors can be checked with the following error detection signals and buffer memory areas corresponding to each axis.- Axis 1 Error detection X8 Buffer memor... More Details >>
- No：22667
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to display local comments in GX Works2

In the "Reference/Reflection Target for Device Comment" window, switch the "Specify the Reference/Reflection" from "Global" to "Local". More Details >>
- No：22630
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Grounding FG and LG terminals of power supply module

Both of them need to be grounded. They can be shorted and grounded as one cable. More Details >>
- No：22527
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
How to copy comments from GX Developer to GX Works2

Launch GX Works2, select [Project] -> [Open Other Project], and read the data created with GX Developer. Copy the comment from the list of device comme... More Details >>
- No：22526
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:32
- Category： MELSEC-Q Series
Regarding How to release Online Program Change

In GX Works3, [Tools] - [Options] - [Conversion] - [Online Program Change], set "Execute Online Program Change in Converting" to "No." More Details >>
- No：44876
- Release Date：2025/03/18 10:26
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Main Unit

121-130 of Total 1023

Inquiries

page top