The FX5-CNV-BUS is an additional cable type. ・Used when the FX5-CNV-BUS previous module is an expansion cable type mo

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized.

The parameters and auto refresh settings for the FL-net (OPCN-2) interface module cannot be made using the Network Param

The socket communication can be used simultaneously with the simple PLC communication function.

The initial version and subsequent versions of L series CPU support the SNTP function.

Set the size of buffer memory used for transient transmission (by dedicated instructions) to local stations, the standby

The following shows the relations between CC-Link terminals and signal lines. - DA : Blue - DB : White - DG : Ye

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not b

Set the RSA strength to at least 2048 bits. Anything less than 2048 bits is not supported by AWS IoT Core and cannot be

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

151-160 of Total 1010

prev 16 / 101page next

Regarding Bus Conversion Module Differences

The FX5-CNV-BUS is an additional cable type. ・Used when the FX5-CNV-BUS previous module is an expansion cable type module. The FX5-CNV-BUSC is an a... More Details >>
- No：44353
- Release Date：2024/03/27 15:49
- Category： MELSEC iQ-F Series , CPU Module
Unable to communicate via USB connection

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized. More Details >>
- No：22511
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Reading and writing bits/words using the FL-net (OPCN-2) interface module

The parameters and auto refresh settings for the FL-net (OPCN-2) interface module cannot be made using the Network Parameter items in GX Developer.Set those ... More Details >>
- No：22597
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Simultaneous use of simple PLC communication function and socket communication

The socket communication can be used simultaneously with the simple PLC communication function. More Details >>
- No：22740
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Versions of built-in Ethernet port LCPU compatible with SNTP function

The initial version and subsequent versions of L series CPU support the SNTP function. More Details >>
- No：22769
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Intelligent Buffer Select of the CC-Link parameter

Set the size of buffer memory used for transient transmission (by dedicated instructions) to local stations, the standby master station, and intelligent devi... More Details >>
- No：22977
- Release Date：2018/09/03 17:31
- Category： Network related products
Relation between CC-Link terminals and signal lines

The following shows the relations between CC-Link terminals and signal lines. - DA : Blue -DB: White -DG: Yellow More Details >>
- No：23077
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:11
- Category： Network related products
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Main Unit
Regarding the change of settings for reserved station (master station) of FX5-CCLGN-MS

FX5-CCLGN-MS allows the master station to change the reserved station setting with parameters, but the setting can not be changed by program. Note that link... More Details >>
- No：39275
- Release Date：2023/01/12 16:46
- Category： MELSEC iQ-F Series , Network/Communication
Regarding issuing Client Certificates to Connect with AWS IoT Core

Set the RSA strength to at least 2048 bits. Anything less than 2048 bits is not supported by AWS IoT Core and cannot be connected. More Details >>
- No：44343
- Release Date：2024/03/20 13:34
- Category： MELSEC iQ-F Series , Network/Communication

151-160 of Total 1010

Inquiries

page top