The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note t

It is possible to change the number of counts for count averaging in a program. Set the module parameter Basic settings

When the block number of the file register (R) is saved and stored, the overhead time becomes 35.9 [us]. When the numbe

The inter-module synchronization function synchronizes the timing to control signals of multiple modules. This function

Set Target Memory to "Standard RAM" in the Read from PLC window to select a file register file.

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed.

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices u

A password can be set. - Use the file password 32 function.- Number of characters: 4 to 32 (alphanumeric and special cha

GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

161-170 of Total 1010

prev 17 / 101page next

Regarding multiple connections for the MQTT communication function

The MQTT communication function of FX5-ENET does not allow multiple connections to be opened at the same time. The MQTT communication function has a maximum ... More Details >>
- No：44358
- Release Date：2024/03/27 16:02
- Category： MELSEC iQ-F Series , Network/Communication
Regarding understanding the difference between "Batch Setting of PDO Mapping" and "PDO Mapping Setting".

The batch setting of PDO mapping sets the default PDO mapping for all device stations that support PDO mapping. *Note that in the batch setting of PDO mappi... More Details >>
- No：44476
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding how to change the averaging processing of FX5-4AD-ADP programmatically

It is possible to change the number of counts for count averaging in a program. Set the module parameter Basic settings to "Set A/D conversion method" to Di... More Details >>
- No：44618
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , Analog
Overhead time of when a fixed scan execution type program of the MELSEC iQ-R series CPU module is executed

When the block number of the file register (R) is saved and stored, the overhead time becomes 35.9 [us]. When the number of the file register is not saved o... More Details >>
- No：22465
- Release Date：2018/09/03 17:28
- Update：2018/09/19 11:57
- Category： MELSEC iQ-R Series
Inter-module synchronization function of MELSEC iQ-R series

The inter-module synchronization function synchronizes the timing to control signals of multiple modules. This function synchronizes the input or output tim... More Details >>
- No：22497
- Release Date：2018/09/03 17:28
- Update：2018/09/20 11:21
- Category： MELSEC iQ-R Series
Reading file registers in the standard RAM

Set Target Memory to "Standard RAM" in the Read from PLC window to select a file register file. More Details >>
- No：22552
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>
- No：22658
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>
- No：22661
- Release Date：2018/09/03 17:29
- Update：2018/09/21 12:18
- Category： MELSEC-Q Series
LCPU protection function

A password can be set. - Use the file password 32 function.- Number of characters: 4 to 32 (alphanumeric and special characters, case-sensitive)- Disabled op... More Details >>
- No：22810
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
GX Works2's compatibility with the ACPU modules

GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM of GX Works2.For the installation pr... More Details >>
- No：22873
- Release Date：2018/09/03 17:30
- Category： Engineering Software

161-170 of Total 1010

Inquiries

page top