The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versi

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

1. Data backup using an optional battery Built-in RAM data and clock data of a programmable controller are held by usi

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, fr

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module

All the components other than comments in Japanese are supported. Ladder programs and parameters can be used as they are

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

161-170 of Total 1010

prev 17 / 101page next

Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Types of data backup methods (FX3G series)

1. Data backup using an optional battery 　Built-in RAM data and clock data of a programmable controller are held by using an optional battery. 　The life of... More Details >>
- No：24701
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
- Category： MELSEC-F Series , Engineering Software , Main Unit
Difference between networks called CC-Link and those called MELSEC

CC-Link IE, supported by the CC-Link Partner Association, is an open field network standard that integrates networks, from a controller network to field/moti... More Details >>
- No：23013
- Release Date：2018/09/03 17:31
- Category： Network related products
Time out error in the communication test of MX Component

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module Check the IP address, network number, sta... More Details >>
- No：22934
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:49
- Category： Engineering Software
Compatibility between the Japanese and English versions of GX Developer

All the components other than comments in Japanese are supported. Ladder programs and parameters can be used as they are, whether or not they are created usi... More Details >>
- No：22848
- Release Date：2018/09/03 17:30
- Category： Engineering Software

161-170 of Total 1010

Inquiries

page top