Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative.

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the in

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Cl

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module C

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file reg

The Transfer Setup window is displayed in the Navigation window.

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input,

There is no function to generate a false error. For example, if operand (s2): divisor is set to "0" in the division comm

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

171-180 of Total 1023

prev 18 / 103page next

Replacement of the fuse in the FX programmable controller

Customers cannot replace the fuse. For the replacement, please consult your local Mitsubishi representative. More Details >>
- No：24909
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Use of latched (battery backed) type auxiliary relay

If the OUT instruction using a latched (battery backed) type auxiliary relay number exists in a sequence program, the information held may be overwritten by ... More Details >>
- No：24877
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Main Unit
Externally switching the operating status of a programmable controller

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Click the "PLC System(1)" tab, and set ... More Details >>
- No：24768
- Release Date：2019/02/27 15:01
- Category： MELSEC-F Series , Engineering Software , Main Unit
Time out error in the communication test of MX Component

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module Check the IP address, network number, sta... More Details >>
- No：22934
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:49
- Category： Engineering Software
Error code "2401" in LCPU

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file register. The cause of the error is that... More Details >>
- No：22797
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Transfer setup in GX Works2

The Transfer Setup window is displayed in the Navigation window. More Details >>
- No：22579
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Regarding the necessity of using a battery

Device back up is available without using a battery. However, to back up link register (W) and file register (R) devices, a FX3U-32BL (battery) is required. More Details >>
- No：22296
- Release Date：2018/08/30 13:55
- Update：2025/11/07 15:52
- Category： MELSEC iQ-F Series , Option , CPU Module
Multiple input COM terminals

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input, the extension unit must be connected ... More Details >>
- No：22274
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Regarding how to generate a false error

There is no function to generate a false error. For example, if operand (s2): divisor is set to "0" in the division command and the command is executed, err... More Details >>
- No：44610
- Release Date：2024/11/28 16:11
- Category： MELSEC iQ-F Series , CPU Module
Regarding setting up encrypted communication (TLS) for FX5-ENET

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "Ethernet Configuration" screen, selec... More Details >>
- No：40050
- Release Date：2023/08/25 08:48
- Category： MELSEC iQ-F Series , Network/Communication

171-180 of Total 1023

Inquiries

page top