A file with the GXW extension is a project in the single file format.GX Works2 Version 1.62Q or later supports projects

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

The IP address can be changed from a program by using the IP address change function. The IP address change function ca

You can select the language to be used in project data (device comments, statements, notes, etc.).With this function, yo

Select [Project] -> [Security] -> [User Management] from the menu to display the "User Addition" window.Set "User

Main differences between GX Works2 and GX Developer are as follows:-The functions of GX Configurator and GX Simulator ar

The FX3U-32BL can be installed to the FX3G/FX3GC series. After installation, select [Battery Mode: Use the battery] on

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Paramete

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

11-20 of Total 1010

prev 2 / 101page next

How to open a GXW file in GX Works2

A file with the GXW extension is a project in the single file format.GX Works2 Version 1.62Q or later supports projects in the single file format. More Details >>
- No：22508
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Regarding EtherCAT Communications

The FX5 CPU module does not support EtherCAT communication. There are no products in the FX series or iQ-F series that support EtherCAT communication. More Details >>
- No：39313
- Release Date：2023/02/14 08:54
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication
Regarding how to change the IP address

The IP address can be changed from a program by using the IP address change function. The IP address change function can change the IP address, subnet mask,... More Details >>
- No：39332
- Release Date：2023/02/14 09:09
- Update：2024/08/19 09:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Language selection function of GX Works2

You can select the language to be used in project data (device comments, statements, notes, etc.).With this function, you can select the language to be used ... More Details >>
- No：22936
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Setting passwords by project

Select [Project] -> [Security] -> [User Management] from the menu to display the "User Addition" window.Set "User Name", "Access Level", "Password", an... More Details >>
- No：22871
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Difference between GX Works2 and GX Developer

Main differences between GX Works2 and GX Developer are as follows:-The functions of GX Configurator and GX Simulator are integrated as GX Works2. No additio... More Details >>
- No：22503
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
How to install a battery to FX3G/FX3GC series

The FX3U-32BL can be installed to the FX3G/FX3GC series. After installation, select [Battery Mode: Use the battery] on the FX parameter window of GX Develop... More Details >>
- No：22271
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
- Category： CPU Module , Engineering Software
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication

11-20 of Total 1010

Inquiries

page top