The following communication methods are available between built-in Ethernet port QCPU modules. - Socket communications

The communication between programmable controllers can be established using the socket communication function instructio

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed.

The following figure shows the basic configuration. When a control system Ethernet module is faulty or disconnected,

There are two types of device comments: "global device comment" and "local device comment". Device comments can be disp

It is only possible to preview the first page to verify the print size and form.

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for Q

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connect

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for sy

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. Fo

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

11-20 of Total 1010

prev 2 / 101page next

Communication between built-in Ethernet port QCPU modules

The following communication methods are available between built-in Ethernet port QCPU modules. - Socket communications are possible. - Communications equ... More Details >>
- No：22586
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:33
- Category： MELSEC-Q Series
Socket communication with the built-in Ethernet port of a CPU module

The communication between programmable controllers can be established using the socket communication function instructions. More Details >>
- No：22596
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>
- No：22658
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Ethernet system configuration of a redundant system

The following figure shows the basic configuration. When a control system Ethernet module is faulty or disconnected, the system is switched at a disco... More Details >>
- No：22718
- Release Date：2018/09/03 17:29
- Update：2018/09/18 11:45
- Category： MELSEC-Q Series
Program by program difference in comments on display

There are two types of device comments: "global device comment" and "local device comment". Device comments can be displayed in the ladder editor and Zoom... More Details >>
- No：22868
- Release Date：2018/09/03 17:30
- Update：2018/09/22 14:40
- Category： Engineering Software
Displaying the next page in the Print Preview window

It is only possible to preview the first page to verify the print size and form. More Details >>
- No：22924
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Precautions taken when QJ61BT11 is replaced with QJ61BT11N

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for QJ61BT11N. (2) If QJ61BT11 is in the... More Details >>
- No：22967
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:20
- Category： Network related products
Connecting terminating resistors for CC-Link communication

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connected to either end of its network. More Details >>
- No：23046
- Release Date：2018/09/03 17:31
- Category： Network related products
Limitation on the number of MELSOFT products that can be connected with the QJ71E71

In the TCP/IP connection, you can connect up to 17 MELSOFT products at the same time using a dedicated connection for system and the connections for users 1 ... More Details >>
- No：23063
- Release Date：2018/09/03 17:31
- Category： Network related products
FL-net setting of GX Works2

You can set the parameters of the FL-net interface module with the data operation of the intelligent function module. For details and operation procedure of... More Details >>
- No：23084
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:19
- Category： Network related products

11-20 of Total 1010

Inquiries

page top