Make a space for comments in the parameter setting of the programmable controller with GX Developer.To write the created

The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors.(1) The module that

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices us

Programs and parameters can be copied using the memory copy function.There are the following two methods of executing th

The simulation function utilizes the standard TCP/IP communication provided by Microsoft Corporation. A communication ca

File registers R can be used for data whose size is exceeding 32k points with RSET instruction, which is a block switch

The FX5 CPU module's built-in high-speed counter can control up to 8CH. Up to 16CH can be controlled by adding 4 modules

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up t

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration sett

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

231-240 of Total 1023

prev 24 / 103page next

Writing comments into a programmable controller

Make a space for comments in the parameter setting of the programmable controller with GX Developer.To write the created comments into a programmable control... More Details >>
- No：22962
- Release Date：2018/09/03 17:31
- Category： Engineering Software
Error code "2110" in LCPU

The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors.(1) The module that has been specified by a FROM/TO instr... More Details >>
- No：22830
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>
- No：22661
- Release Date：2018/09/03 17:29
- Update：2018/09/21 12:18
- Category： MELSEC-Q Series
Copying programs when replacing the CPU module

Programs and parameters can be copied using the memory copy function.There are the following two methods of executing the memory copy function.- Using the me... More Details >>
- No：22644
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Simulation function not started

The simulation function utilizes the standard TCP/IP communication provided by Microsoft Corporation. A communication capability of software of another make... More Details >>
- No：22631
- Release Date：2018/09/03 17:29
- Update：2018/09/21 10:45
- Category： MELSEC-Q Series
How to use file registers R in the Q series

File registers R can be used for data whose size is exceeding 32k points with RSET instruction, which is a block switching instruction. Use file registers... More Details >>
- No：22525
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:29
- Category： MELSEC-Q Series
Regarding the maximum number of channels of high-speed counters

The FX5 CPU module's built-in high-speed counter can control up to 8CH. Up to 16CH can be controlled by adding 4 modules of FX5-16ET/E□-H (high-speed pulse ... More Details >>
- No：22311
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:34
- Category： MELSEC iQ-F Series , CPU Module , High-Speed Counter
Regarding CW/CCW(Forward pulse/Reverse pulse) output of the built-in positioning function

FX5U/FX5UC/FX5S CPU modules are supported. Up to 2 axes are available in GX Works3 parameter settings. In addition, up to 8 axes can be added by adding a hi... More Details >>
- No：22306
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:48
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding speed change of positioning operation.

It can be changed. For details, please refer to MELSEC iQ-F FX5 User's Manual (Positioning Control - CPU module built-in, high speed pulse input/output modu... More Details >>
- No：22299
- Release Date：2018/08/30 13:55
- Update：2023/02/14 09:52
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding PDO Mapping Settings

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration settings from the FX5-CCLGN-MS Basic Set... More Details >>
- No：44475
- Release Date：2024/07/02 19:07
- Category： MELSEC iQ-F Series , Network/Communication

231-240 of Total 1023

Inquiries

page top