GX Configurator-MB does not need to be purchased. Parameters can be set using GX Works2 alone.

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an e

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

For TCP protocol of SLMP communication, KeepAlive is fixed and cannot be changed. In the case of UDP protocol, it is fix

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card fun

You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site.

It is cleared by eliminating the cause of the error during detection and turning on SM50. For the error codes that can b

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the D

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

241-250 of Total 1023

prev 25 / 103page next

GX Configurator-MB for the MODBUS(R) interface module

GX Configurator-MB does not need to be purchased. Parameters can be set using GX Works2 alone. More Details >>
- No：22701
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Regarding the built-in analog input/output function

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an external resister is connected, the m... More Details >>
- No：22313
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:47
- Category： MELSEC iQ-F Series , CPU Module , Analog
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Network/Communication
Regarding KeepAlive for SLMP Communication

For TCP protocol of SLMP communication, KeepAlive is fixed and cannot be changed. In the case of UDP protocol, it is fixed to not perform a keep-alive check. More Details >>
- No：45477
- Release Date：2025/11/12 13:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding setting up encrypted communication (TLS) for FX5-ENET

In GX Works3, set the FX5-ENET module parameters from Basic Settings - External Device Configuration Settings. In the "Ethernet Configuration" screen, selec... More Details >>
- No：40050
- Release Date：2023/08/25 08:48
- Category： MELSEC iQ-F Series , Network/Communication
Regarding the requirement of SD Memory Card module function of FX5S CPU module

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card function (SD memory card forced stop,... More Details >>
- No：39338
- Release Date：2023/02/14 17:29
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding FX5-ENET/IP parameter settings

You will need the EtherNet/IP Configuration Tool for FX5-ENET/IP. Download the tool from the FA site. More Details >>
- No：39302
- Release Date：2023/01/12 16:53
- Category： MELSEC iQ-F Series , Network/Communication
Regarding clearing error with SM50

It is cleared by eliminating the cause of the error during detection and turning on SM50. For the error codes that can be cleared on the SM50, refer to the ... More Details >>
- No：39292
- Release Date：2023/02/13 15:37
- Category： MELSEC iQ-F Series , CPU Module
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
Differences between the FX3UC-32MT-LT and the FX3UC-32MT-LT2

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the DIP switch. For the FX3UC-32MT-LT2, th... More Details >>
- No：24956
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Main Unit , Network/Communication

241-250 of Total 1023

Inquiries

page top