CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run.

The FX5-2HC/ES is supported by the following FX5 CPU Module firmware versions and GX Works3 versions: Firmware Version

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current a

Up to 4 FX5-4A-ADPs can be connected to an FX5U/FX5UC/FX5S CPU module. To connect 3 or more FX5-4A-ADPs, the FX5-4A-ADP

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card fun

Whether the terminal block is removable or not differs depending on the series. Types of the terminal blocks for the MEL

The CC-Link IE Control Network is a high-capacity controller network whose maximum number of link points is 128k words.

(1) Sampling processing - Without the temperature drift compensation function Processing time = Number of

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

251-260 of Total 1023

prev 26 / 103page next

Regarding CC-Link IE field CPU module status during communication error occurs on CC-Link IE Field Network Basic

CC-Link IE field When a network such as Network Basic is interrupted, the CPU module does not stop and continues to run. When the CC-Link IE Field Network i... More Details >>
- No：44611
- Release Date：2024/11/28 16:11
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the FX5-2HC/ES-enabled CPU module firmware version

The FX5-2HC/ES is supported by the following FX5 CPU Module firmware versions and GX Works3 versions: Firmware Version ・FX5U/FX5UC CPU Module: Ver. 1.300... More Details >>
- No：44341
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the difference of current address (user unit, pulse unit)

The difference between the current address (user unit) and the current address (pulse unit) is as follows: The current address (user unit) becomes the unit ... More Details >>
- No：39357
- Release Date：2023/02/15 13:05
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding the number of FX5-4A-ADP connections

Up to 4 FX5-4A-ADPs can be connected to an FX5U/FX5UC/FX5S CPU module. To connect 3 or more FX5-4A-ADPs, the FX5-4A-ADP must have a serial number S/N: 224... More Details >>
- No：39348
- Release Date：2023/02/15 10:16
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding the requirement of SD Memory Card module function of FX5S CPU module

SD Memory Card Module: FX5-SDCD is required for the following functions. ・Firmware update function ※ 1 ・Memory card function (SD memory card forced stop,... More Details >>
- No：39338
- Release Date：2023/02/14 17:29
- Category： MELSEC iQ-F Series , Option , CPU Module
Terminal blocks for the MELSEC-F series

Whether the terminal block is removable or not differs depending on the series. Types of the terminal blocks for the MELSEC-F series main units are as follow... More Details >>
- No：24774
- Release Date：2019/02/27 15:34
- Category： MELSEC-F Series , Main Unit
Differences between CC-Link IE Control Network and CC-Link IE Field Network

The CC-Link IE Control Network is a high-capacity controller network whose maximum number of link points is 128k words. The CC-Link IE Field Network is an al... More Details >>
- No：23085
- Release Date：2018/09/03 17:31
- Category： Network related products
A/D conversions performed by Q64AD/Q68ADV/Q68ADI

(1) Sampling processing - Without the temperature drift compensation function Processing time = Number of channels usedx 80 (us/1 channel) - With the t... More Details >>
- No：22705
- Release Date：2018/09/03 17:29
- Update：2018/09/26 16:34
- Category： MELSEC-Q Series
Regarding model name of CC-Link cables

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use a cable certified by the CC-Link Asso... More Details >>
- No：22330
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:53
- Category： MELSEC iQ-F Series , Network/Communication

251-260 of Total 1023

Inquiries

page top