Can I open a program created with GX Works2 in GX Developer?

You cannot open a program in the file format for GX Works2. When saving a project with GX Works2, save it in the format for GX Developer.(This is possible on... More Details >>

How to set CC-Link reserved stations

- If the Network Parameter is used Make "Station Information Setting". - If the parameter is set using a dedicated instruction Set the control data of... More Details >>

PLC parameter setting for QJ61BT11N

If the Network Parameter is used, CC-Link communication does not need the Select setting in the I/O assignment setting of the PLC parameter.If the parameter ... More Details >>

Transient transmission of the CC-Link IE Controller

Transient transmission is a function that allows communication with programmable controllers in other stations. Communication with programmable controllers i... More Details >>

Duplication error in a CC-Link master station

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at power on. More Details >>

Station number settings for MELSECNET/H networks

A station number can be skipped by setting the station as a reserved station. More Details >>

Cascade connections between hubs in the CC-Link IE Field Network

UP to 20 levels of cascade connections can be made. More Details >>

Refresh timing of bit data and word data in the same CC-Link station

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Block data assurance per station" of the ... More Details >>

MX Component Version 3's compatibility with 64-bit Windows 7

MX Component Version 3.15R or later supports 64-bit Windows 7. More Details >>

Inputting device comments in GX Works2

Select [Tool] -> [Options] -> [Program Editor] -> "Ladder/SFC"-> "Comment" and change "Reference/Reflection Target for Device Comment" from "Glob... More Details >>