Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

Yes.When connecting a GOT, set the mode setting switch of AJ65BT-R2N to "5" (MELSOFT connection mode).

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connect

Major differences are shown below. - AJ65SBTB1-32DT1 <Input specifications> - Input type positive common (sink ty

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the

Select [Tool] -> [Options] -> [Program Editor] -> [Ladder/SFC] -> [Enter ladder] from the menu, and set [En

GX IEC Developer and GX Developer are different products. They are not compatible. Projects created using GX IEC Develop

The initial version and subsequent versions of MX Component Version 4 support Visual Basic and Visual C++ of Visual Stud

Check the serial number of the built-in Ethernet port QCPU in use. The Built-in Ethernet port QCPU modules with serial n

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

281-290 of Total 1023

prev 29 / 103page next

Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit , I/O Extension
Connecting AJ65BT-R2N to a GOT

Yes.When connecting a GOT, set the mode setting switch of AJ65BT-R2N to "5" (MELSOFT connection mode). More Details >>
- No：23047
- Release Date：2018/09/03 17:31
- Category： Network related products
Connecting terminating resistors for CC-Link communication

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connected to either end of its network. More Details >>
- No：23046
- Release Date：2018/09/03 17:31
- Category： Network related products
Difference between AJ65SBTB1-32DTE1 and AJ65SBTB1-32DT1

Major differences are shown below. - AJ65SBTB1-32DT1 - Input type positive common (sink type) - Rated input current approx. 5 mA - ON voltage/ON curr... More Details >>
- No：23022
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:52
- Category： Network related products
CC-Link slave station's flashing L.ERR LED

If the L.ERR LED flashes at irregular intervals, it may indicate that no terminating resistor has been connected or the communication is instable due to the ... More Details >>
- No：23001
- Release Date：2018/09/03 17:31
- Category： Network related products
Setting for sequentially inputting device comments in GX Works2

Select [Tool]-> [Options]-> [Program Editor] -> [Ladder/SFC] -> [Enter ladder] from the menu, and set [Enter label comment and device comment]... More Details >>
- No：22938
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:54
- Category： Engineering Software
Compatibility between GX IEC Developer and GX Developer

GX IEC Developer and GX Developer are different products. They are not compatible. Projects created using GX IEC Developer can neither be opened in GX Develo... More Details >>
- No：22860
- Release Date：2018/09/03 17:30
- Category： Engineering Software
MX Component Version 4's compatibility with Visual Studio 2010

The initial version and subsequent versions of MX Component Version 4 support Visual Basic and Visual C++ of Visual Studio 2010. More Details >>
- No：22842
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Use of an A-compatible 1E frame for the built-in Ethernet port of the built-in Ethernet port QCPU

Check the serial number of the built-in Ethernet port QCPU in use. The Built-in Ethernet port QCPU modules with serial numbers with upper 5 digits of "13102"... More Details >>
- No：22676
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

281-290 of Total 1023

Inquiries

page top