Regarding maximum number of connections for MQTT communication function

The MQTT communication function can be used for up to one connection. More Details >>

MX Component Version 3's compatibility with 64-bit Windows 7

MX Component Version 3.15R or later supports 64-bit Windows 7. More Details >>

MX Component Version 3's compatibility with Visual Studio 2010

MX Component Version 3.15R or later supports Visual Basic and Visual C++ of Visual Studio 2010. More Details >>

Communication between built-in Ethernet port QCPU modules

The following communication methods are available between built-in Ethernet port QCPU modules. - Socket communications are possible. - Communications equ... More Details >>

Transparent function

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and select "via GOT (direct coupled) tra... More Details >>

The VxWorks simulator CW-SIM

CW-SIM is a simulation software that allows a VxWorks program to be executed on a personal computer without a C Controller module. There are two types of CW... More Details >>

QCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices. - Protocol: "UDP" - Open System: "MELSOFT connecti... More Details >>

Setting of "Target MODBUS(R) device head number"

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holding register 400018, set "17". More Details >>

Boot file setting of the QnUDVCPU

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source). More Details >>

How to use L series extension modules

The extension module is used to configure the extension block when 10 modules or more are mounted to LCPU. Connect the branch module and the extension module... More Details >>