Logging data storage in a USB memory

GX LogViewer function of Mitsubishi GOT (GT16) extracts the logging data to a USB memory attached to the USB interface on the front of the GOT. More Details >>

Boot file setting of the QnUDVCPU

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source). More Details >>

Remedy for the division-related operation error

The operation error occurs when the divisor is 0.Create a program in which a comparison operation instruction or another method executes a division instructi... More Details >>

Copying programs when replacing the CPU module

Programs and parameters can be copied using the memory copy function.There are the following two methods of executing the memory copy function.- Using the me... More Details >>

CF cards supported by the high speed data logger module

For applicable CF cards, refer to the latest version of the following manual.- High Speed Data Logger Module User's Manual- SH-080818ENG- 2.3 Connection Syst... More Details >>

Transparent function

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and select "via GOT (direct coupled) tra... More Details >>

PLC write not possible due to memory overload

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develo... More Details >>

How to write to file registers in Q series

Specify the file in the Write to PLC window and execute writing. More Details >>

USB communication driver

Is the version of MX Component compatible with Windows 7? Update the software to the version compatible with Windows 7 and then update the driver. For the ... More Details >>

Battery replacement for universal model QCPU

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three minutes, which is the backup power tim... More Details >>