END cover

An error occurs and CPU will stop. Install the END cover and reset the CPU module. More Details >>

Battery install position in LCPU

Open the cover at the bottom of the CPU module and install the battery. More Details >>

GX Developer's compatibility with QnUDVCPU

GX Developer does not support QnUDVCPU. Please use GX Works2 instead. More Details >>

Dragging and dropping function blocks in a structured project

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the program. More Details >>

Resistor value for CC-Link cables

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link dedicated cables (Version 1.00): 110... More Details >>

PLC parameter setting for QJ61BT11N

If the Network Parameter is used, CC-Link communication does not need the Select setting in the I/O assignment setting of the PLC parameter.If the parameter ... More Details >>

Refresh devices

For CPU modules with 8192 I/O device points (X/Y0 to 1FFF), X/Y1000 and greater can be set as refresh devices. More Details >>

Receiving data when no receive complete code is designated (QJ71C24N)

Data are received on a received data count basis. If there is no receive complete code and variable length data is received, the data is received at every no... More Details >>

Order in which a CC-Link master module and slave stations are connected

There is no restriction on the positions of a master station and slave stations where they are connected. (Stations are not required to be connected in order... More Details >>

Link data from communication error stations in a CC-Link network

The remote input RX of the master station and the remote input RX and remote output RY of local stations clear/hold the data from an error station according ... More Details >>