Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-L (for Ethernet communications)

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurator-EN-L can be downloaded from Mitsubi... More Details >>

AC input type main unit in the FX3 series

FX3U-32MR/UA1 and FX3U-64MR/UA1 are AC input types. More Details >>

Number of FX3U-16CCL-M CC-Link master blocks that can be added to a main unit

One FX3U-16CCL-M can be added. More Details >>

Use of vacant terminals "∙"

Do not use vacant terminals. More Details >>

Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>

How to display the multiple CPU function setting window of MELSEC iQ-R series CPU modules

You can display the setting window in the multiple CPU setting of system parameters. <Multiple CPU setting> [Navigation Window]-> [Parameter]-&g... More Details >>

Difference between GX Works2 and GX Works

GX Works2 is programmable controller engineering software integrating programming and simulation of programmable controller and setting monitor tool functio... More Details >>

Transparent function

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and select "via GOT (direct coupled) tra... More Details >>

What to do in the case of the error "A default router IP address needs to be set."

When having access bypassing a router, enter only the IP address.The subnet mask pattern is not required to be entered because GX Works2 or GX Developer auto... More Details >>

Making transparent connections using GX Developer

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "CPU Module" for "PLC side I/F" and check "via GOT (direct couple... More Details >>