The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2.

You do not have to change the device numbers for each station number in the initial setting procedure registration windo

This function allows data communications between specified devices at the specified timing, using the built-in Ethernet.

The communication data code is selectable by the communication data code setting in [Parameter] -> [PLC Parameter] -&

- When a built-in Ethernet port QCPU is used You can synchronize it with the server using the time setting function.

Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are use

Modules do not need setting in GX Works2 if not selectable from "Module Selection" in the "New Module" window for intell

The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT and

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized.

When an SET instruction and RST instruction use a single device, no duplicated coil error is detected.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

311-320 of Total 1023

prev 32 / 103page next

Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-ADP (for Ethernet communications)

The FX3U-ENET-ADP does not support the DHCP function. Set the fixed IP address using the parameter setting of GX Works2. On GX Works2, select "Parameter" and... More Details >>
- No：24870
- Release Date：2019/04/15 08:05
- Category： MELSEC-F Series , Network/Communication
Device numbers set in the initial setting procedure registration window of the CC-Link remote device station

You do not have to change the device numbers for each station number in the initial setting procedure registration window. Example) When the AJ65SBT2B-64A... More Details >>
- No：22949
- Release Date：2018/09/03 17:30
- Update：2018/09/25 11:05
- Category： Engineering Software
Simple PLC communication function

This function allows data communications between specified devices at the specified timing, using the built-in Ethernet. Device data such as production data ... More Details >>
- No：22737
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Communication data code of the MC protocol for the built-in Ethernet port in LCPU

The communication data code is selectable by the communication data code setting in [Parameter] -> [PLC Parameter] -> [Built-in Ethernet Port Setting]. More Details >>
- No：22735
- Release Date：2018/09/03 17:29
- Update：2018/09/21 17:22
- Category： MELSEC-L Series
Synchronizing the internal clock of a universal model QCPU

- When a built-in Ethernet port QCPU is used You can synchronize it with the server using the time setting function. -When a module other than built-in ... More Details >>
- No：22723
- Release Date：2018/09/03 17:29
- Update：2018/09/21 15:53
- Category： MELSEC-Q Series
Input derating

Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are used. When QX42 is used in a temperatur... More Details >>
- No：22692
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:23
- Category： MELSEC-Q Series
Intelligent function module settings in GX Works2

Modules do not need setting in GX Works2 if not selectable from "Module Selection" in the "New Module" window for intelligent function module settings. More Details >>
- No：22685
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Turning ON/OFF annunciators (F)

The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT and SET instructions. - Turn OFF the r... More Details >>
- No：22649
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:45
- Category： MELSEC-Q Series
Unable to communicate via USB connection

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized. More Details >>
- No：22511
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Duplicated coil errors that can be checked with GX Works3

When an SET instruction and RST instruction use a single device, no duplicated coil error is detected. More Details >>
- No：22456
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:33
- Category： MELSEC iQ-R Series

311-320 of Total 1023

Inquiries

page top