Number of extension cables that can be used per system

One extension cable can be used per system. Two or more extension cables cannot be used. More Details >>

Number of GOTs (GOT1000 series) that can be connected to a FX3U-ENET-L

Up to two GOTs can be connected toa FX3U-ENET-L and MELSOFT connection needs to be set. More Details >>

Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>

Setting of the FX3U-ENET-ADP Ethernet communication special adapter

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.　 More Details >>

COM terminal for outputs

For output terminals of a programmable controller, one common terminal is used for 1, 2, 4, or 8 output points. Each common line is assigned with a different... More Details >>

Clock function accuracy of the MELSEC-F series

The accuracy is within ±45 seconds/month (ambient temperature: 25ºC). More Details >>

Communication between a CC-Link master station and local stations

There are two modes of transient transmission, cyclic transmission and transient transmission, for the communication between a master station and a local sta... More Details >>

Difference in specifications between CC-Link versions

Ver.1.10 is a standard where CC-Link station-to-station cable length restriction in Ver. 1.00 has been removed, and the length of all station-to-station cabl... More Details >>

Duplicated coil errors that can be checked with GX Works2

When an SET instruction and RST instruction use a single device, no duplicated coil error is detected. More Details >>

The VxWorks simulator CW-SIM

CW-SIM is a simulation software that allows a VxWorks program to be executed on a personal computer without a C Controller module. There are two types of CW... More Details >>