When an error has occurred in the master station (including the standby master station), the data link control cannot be

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector convers

FX3U-16CCL-M CC-Link master block and the FX3U-64CCL CC-Link interface block supports CC-Link Ver.2.0. Both blocks are d

This can be checked by monitoring the corresponding buffer memory from the Register to Intelligent Function Module Monit

You can change the destination in [Online] -> [Specify Connection Destination]. Change the destination depending on t

Yes, it does.GX Developer can be installed along with the installation of GX Works2.For more details of the installation

The duplicated coil error is detected when SET instruction and RST instruction use the same device.

If file registers are registered in the standard RAM and "R" is specified by an instruction, the processing time is the

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three m

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

341-350 of Total 1023

prev 35 / 103page next

How to check errors in a CC-Link master station

When an error has occurred in the master station (including the standby master station), the data link control cannot be performed, and you cannot check erro... More Details >>
- No：23078
- Release Date：2018/09/03 17:31
- Category： Network related products
Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories
Programmable controller series which the FX3U-1PG pulse output block can be added to

FX3U/FX3UC series (Ver. 2.20 or later) * To connect the FX3U-1PG to the FX3UC series, the FX2NC-CNV-IF connector conversion adapter or the FX3UC-1PS-5V exte... More Details >>
- No：24947
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series , Positioning Control
FX series products that support CC-Link Ver.2.0

FX3U-16CCL-M CC-Link master block and the FX3U-64CCL CC-Link interface block supports CC-Link Ver.2.0. Both blocks are dedicated for the FX3 series. More Details >>
- No：25004
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Network/Communication
Regarding checking the input/output data of the FX5-EIP

This can be checked by monitoring the corresponding buffer memory from the Register to Intelligent Function Module Monitor. From [Parameter] - [Module Infor... More Details >>
- No：45490
- Release Date：2025/05/08 09:08
- Update：2025/10/31 15:18
- Category： MELSEC iQ-F Series , Network/Communication
How to change the specified connection destination of GX Works3

You can change the destination in [Online]-> [Specify Connection Destination]. Change the destination depending on the communication path to be used. Yo... More Details >>
- No：22472
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:31
- Category： MELSEC iQ-R Series
Including GX Developer in GX Works2

Yes, it does.GX Developer can be installed along with the installation of GX Works2.For more details of the installation procedure, refer to GX Works2 Versio... More Details >>
- No：22506
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Duplicated coil error

The duplicated coil error is detected when SET instruction and RST instruction use the same device. More Details >>
- No：22534
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Speeds of access to file registers

If file registers are registered in the standard RAM and "R" is specified by an instruction, the processing time is the same as is the case with the internal... More Details >>
- No：22688
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Battery replacement for LCPU

The contents of the standard RAM and latch devices are not erased if the battery replacement is completed within three minutes, which is the backup power tim... More Details >>
- No：22733
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series

341-350 of Total 1023

Inquiries

page top