Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations and intelligent device stati

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versio

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details.

Parallel linking between FX5 and FX3 CPU modules is not available. The N:N Network function supports communication betwe

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, wr

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are tho

No, they cannot be connected. Connect the units having the same power supply type.

The FX3G-1DA-BD (1-channel analog output extension board), FX3U-4DA-ADP (4-channel analog output special adapter), and F

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

371-380 of Total 1023

prev 38 / 103page next

Regarding the connection configuration of FX5-CCL-MS

Connection is not allowed. For FX5-CCL-MS, only remote I/O stations, remote device stations andintelligent device stationscan be connected. More Details >>
- No：22316
- Release Date：2018/08/30 13:55
- Update：2023/07/03 17:19
- Category： MELSEC iQ-F Series , Network/Communication
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding MELSOFT Products that do not work correctly

If you use a Microsoft IME, the MELSOFT product may not work properly. Please see the technical news below for details. Notes on using the Japanese Input M... More Details >>
- No：40048
- Release Date：2023/08/24 16:32
- Category： MELSEC iQ-F Series , Engineering Software
Regarding the parallel link function between CPU modules

Parallel linking between FX5 and FX3 CPU modules is not available. The N:N Network function supports communication between the FX5 CPU module and the FX3 CPU... More Details >>
- No：39364
- Release Date：2023/02/15 13:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding nesting contacts displayed on bus by master control instructions

It is not possible. More Details >>
- No：39361
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding changing the current address (user unit, pulse unit)

It can be changed. It is now possible to write to the address (user unit, pulse unit) by the DHCMOV command. However, writing is disabled during positioning... More Details >>
- No：39356
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning
Regarding GX Works3 Module configuration diagram

It can't be configured. In the module configuration diagram of GX Works3, the configurations that can be created are those excluding FX5-CNV-IFC and FX3 Int... More Details >>
- No：39331
- Release Date：2023/02/14 09:08
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Connecting a DC power supply type extension unit to an AC power supply type main unit

No, they cannot be connected. Connect the units having the same power supply type. More Details >>
- No：25008
- Release Date：2019/04/23 11:12
- Category： MELSEC-F Series , Main Unit
Analog output modules that can be used in the FX3G series

The FX3G-1DA-BD (1-channel analog output extension board), FX3U-4DA-ADP (4-channel analog output special adapter), and FX3U-3A-ADP (2-channel analog input/1-... More Details >>
- No：24979
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Analog Control
Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories

371-380 of Total 1023

Inquiries

page top