Data stored in the programmable controller can be saved to a CF card using a FX3U-CF-ADP CF card special adapter for the

An expansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.)

The thickness of wire should be 2 square millimeters or more, and class D grounding (grounding resistance: 100 Ω or less

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications),

When an error has occurred in the master station (including the standby master station), the data link control cannot be

Data are received on a received data count basis. If there is no receive complete code and variable length data is recei

The overall cable distance and station-to-station distance depend on the version and the transmission speed. Figure 1 sh

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh dev

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

381-390 of Total 1023

prev 39 / 103page next

Data collection with FX programmable controller

Data stored in the programmable controller can be saved to a CF card usinga FX3U-CF-ADP CF card special adapter for the FX3U/FX3UC series. More Details >>
- No：24936
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , Accessories
Connecting special adapters to FX3U series

Anexpansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.) More Details >>
- No：24934
- Release Date：2019/04/18 14:23
- Category： MELSEC-F Series , Main Unit , I/O Extension
Thickness of ground wire

The thickness of wireshould be2 square millimeters or more, andclass D grounding (grounding resistance: 100 Ω or less) should be performed. More Details >>
- No：24899
- Release Date：2019/04/15 11:30
- Category： MELSEC-F Series , Main Unit
Setting of the FX3U-ENET-ADP Ethernet communication special adapter

GX Works2 with Ver. 1.90U or later can be used for the setting of the FX3U-ENET-ADP.　 More Details >>
- No：24875
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Network/Communication
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Main Unit
Using the FX3U-ENET-ADP and the RS-232C/RS-485 together (FX3U/FX3UC series)

Up to two of the following optional communication equipment, including the FX3U-ENET-ADP (for Ethernet communications), can be used for the FX3U/FX3UC series... More Details >>
- No：24686
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:16
- Category： MELSEC-F Series , Main Unit , Network/Communication
How to check errors in a CC-Link master station

When an error has occurred in the master station (including the standby master station), the data link control cannot be performed, and you cannot check erro... More Details >>
- No：23078
- Release Date：2018/09/03 17:31
- Category： Network related products
Receiving data when no receive complete code is designated (QJ71C24N)

Data are received on a received data count basis. If there is no receive complete code and variable length data is received, the data is received at every no... More Details >>
- No：23038
- Release Date：2018/09/03 17:31
- Category： Network related products
Overall cable distance and station-to-station distance in CC-Link networks

The overall cable distance and station-to-station distance depend on the version and the transmission speed. Figure 1 shows the case with Ver.1.10-compatibl... More Details >>
- No：23028
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:14
- Category： Network related products
Read and write operations for CC-Link buffer memory

There is no problem in writing/reading data into/from the buffer memory using a FROM/TO instruction with the refresh device setting left blank.The refresh de... More Details >>
- No：23015
- Release Date：2018/09/03 17:31
- Category： Network related products

381-390 of Total 1023

Inquiries

page top