No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-

- Set successive station numbers for the network modules in system A and system B in a redundant system. (Station nu

Select [View] -> [Comment] from the menu to display comments. You can display local comments with the following proce

CPU modules supporting the serial communication function are as follows. - Q00UJCPU,Q00UCPU,Q01UCPU - Q02UCPU 10102 or

For a label where digits are to be specified, set a bit type array as its data type. The following shows an example of w

D8030 for VR1, and D8031 for VR2.

Open the cover at the bottom of the CPU module and install the battery.

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID c

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices us

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

401-410 of Total 1023

prev 41 / 103page next

Accessories of the MELSEC iQ-R series 40-pin connector type module

No connector is provided with the module. Separately prepare any of the following connectors. A6CON1: Soldering type 32-point connector (40-pin connector) A6... More Details >>
- No：22467
- Release Date：2018/09/03 17:28
- Category： MELSEC iQ-R Series
Precaution about MELSECNET/H connection (1)

- Set successive station numbers for the network modules in system A and system B in a redundant system. (Station number 0 cannot be set.) - Match "host... More Details >>
- No：23055
- Release Date：2018/09/03 17:31
- Update：2018/09/26 11:12
- Category： Network related products
Displaying comments in GX Works2

Select [View] -> [Comment] from the menu to display comments. You can display local comments with the following procedure. (1) Select [Tool] -> [Op... More Details >>
- No：22941
- Release Date：2018/09/03 17:30
- Update：2018/09/25 09:58
- Category： Engineering Software
CPU modules supporting the serial communication function

CPU modules supporting the serial communication function are as follows. - Q00UJCPU,Q00UCPU,Q01UCPU - Q02UCPU 10102 or later (with GX Works2 1.15R or l... More Details >>
- No：22530
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:37
- Category： MELSEC-Q Series
Digit specification for bit devices in ST language with GX Works3

For a label where digits are to be specified, set a bit type array as its data type. The following shows an example of when a global label is used. - Globa... More Details >>
- No：22455
- Release Date：2018/09/03 17:28
- Update：2018/09/18 15:01
- Category： MELSEC iQ-R Series
Built-in variable analog potentiometers of the FX3G series

D8030 for VR1, and D8031 for VR2. More Details >>
- No：24769
- Release Date：2019/02/27 15:01
- Category： MELSEC-F Series , Main Unit , Analog Control
Battery install position in LCPU

Open the cover at the bottom of the CPU module and install the battery. More Details >>
- No：22821
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Built-in positioning function of LCPU

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-curve acceleration/deceleration is al... More Details >>
- No：22790
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
How to control MV value

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID control tag. Set the following parame... More Details >>
- No：22724
- Release Date：2018/09/03 17:29
- Update：2018/09/26 16:40
- Category： MELSEC-Q Series
Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>
- No：22661
- Release Date：2018/09/03 17:29
- Update：2018/09/21 12:18
- Category： MELSEC-Q Series

401-410 of Total 1023

Inquiries

page top