Intelligent Buffer Select of the CC-Link parameter

Set the size of buffer memory used for transient transmission (by dedicated instructions) to local stations, the standby master station, and intelligent devi... More Details >>

Precautions taken when QJ61BT11 is replaced with QJ61BT11N

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for QJ61BT11N. (2) If QJ61BT11 is in the... More Details >>

Copying device comments in GX Works2

Select a device comment in the project view and select "Copy" from the right-click menu. More Details >>

Time out error in the communication test of MX Component

The possible causes are as follows. - Incorrect setting with a personal computer or an Ethernet interface module Check the IP address, network number, sta... More Details >>

MX Sheet Version 2's compatibility with 32-bit Excel2010

Yes. More Details >>

Compatibility between GX IEC Developer and GX Developer

GX IEC Developer and GX Developer are different products. They are not compatible. Projects created using GX IEC Developer can neither be opened in GX Develo... More Details >>

Statements of GX Works2 and the scan time

The input method for statements, either "PLC" or "Peripheral", makes a difference. - If "PLC" is set for statements, they are written into the program mem... More Details >>

Copying statements and notes of GX Developer

Notes and statements are batch managed in the program file. It is impossible to copy notes and statements alone. More Details >>

How to increase file register capacity

In LCPU, file register capacity depends on CPU. The number of file register points cannot be increased. (A file register cannot be set on an SD memory card.)... More Details >>

CPU clock setting by SNTP functions via built-in Ethernet port in LCPU

The clock setting of the CPU module is set automatically in accordance with the clock data collected from the time information server (SNTP server) on the LAN. More Details >>