CW Workbench

CW Workbench is an engineering tool for C Controller modules that provides basic functions from edits to compilation/debugging.Using CW Workbench, applicatio... More Details >>

Use of commercial SD memory cards

Yes. A commercial SD memory card can be used. (32 GB max.)Connectable SD memory cards that passed our operation check are listed in the technical bulletin. More Details >>

Operation during power failure

It stops during execution. More Details >>

Use of an A-compatible 1E frame for the built-in Ethernet port of LCPU

The built-in Ethernet port in the L series is compatible only with a QnA-compatible 3E frame of the MC protocol. An A-compatible 1E frame is not supported. More Details >>

How to control MV value

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID control tag. Set the following parame... More Details >>

Change timing of the status of A/D conversion module's I/O signals

(1)If the A/D conversion enable signal is kept ON, conversion processing is kept performed. Once conversion processing is successfully performed, A/D conve... More Details >>

Speeds of access to file registers

If file registers are registered in the standard RAM and "R" is specified by an instruction, the processing time is the same as is the case with the internal... More Details >>

File register setting window

No. More Details >>

Updating to the 64-bit Windows 7 version of GX Works2

The message is displayed because the version of the CD does not support the 64-bit version. Execute the installation procedure in the condition. More Details >>

Battery replacement

Make sure to turn off the power of the programmable controller before replacing the battery. Replacing the battery while the power of the programmable con... More Details >>