The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors. (1) The module t

The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT an

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot

Select [Online] -> [Read from PLC] from the menu and check "Device Memory" in the file list in the window and then ex

GX Developer Version 8.98C or later supports 64-bit Windows 7. To install GX Developer to a Windows 7-based personal co

M384 to M1535 and D128 to D1099 can be latched. M1536 to M7679, D1100 to D7999, and R0 to R23999 can be used as latch

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or

Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =.

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or othe

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(578)

CPU Module(158)
I/O Module(5)
Analog(13)
High-Speed Counter(13)
Motion/Positioning(11)
Network/Communication(90)
Option(9)
Engineering Software(55)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

41-50 of Total 983

prev 5 / 99page next

Error code "2110" in QCPU

The error code "2110" is "SP.UNIT ERROR.". This error may be caused by one of the following factors. (1) The module that has been specified by a FROM/TO i... More Details >>
- No：22662
- Release Date：2018/09/03 17:29
- Update：2018/09/21 13:48
- Category： MELSEC-Q Series
Turning ON/OFF annunciators (F)

The data in the special registers SD62 to SD79 change with the following process. - Turn ON the registers with OUT and SET instructions. - Turn OFF the r... More Details >>
- No：22649
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:45
- Category： MELSEC-Q Series
Resistor value for CC-Link cables

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link dedicated cables (Version 1.00): 110... More Details >>
- No：22983
- Release Date：2018/09/03 17:31
- Update：2018/10/03 14:42
- Category： Network related products
Remedies for WDT errors on a MELSECNET/H board

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot work due to a computer or OS hang, or... More Details >>
- No：22969
- Release Date：2018/09/03 17:31
- Category： Network related products
How to read the device memory in GX Works2

Select [Online] -> [Read from PLC] from the menu and check "Device Memory" in the file list in the window and then execute PLC read. More Details >>
- No：22621
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
GX Developer's compatibility with 64-bit Windows 7

GX Developer Version 8.98C or later supports 64-bit Windows 7. To install GX Developer to a Windows 7-based personal computer, refer to the following techni... More Details >>
- No：22501
- Release Date：2018/09/03 17:28
- Update：2018/09/20 12:19
- Category： MELSEC-Q Series
Latch (backup) areas in the auxiliary relay (M), data register (D), and extended register (R) of the FX3G/FX3GC series

M384 to M1535 and D128 to D1099 can be latched. M1536 to M7679, D1100 to D7999, and R0 to R23999 can be used as latch areas by installing an optional batt... More Details >>
- No：24703
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
I/O assignment of PLC parameters with GX Works3

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "System Parameter". <Setting fr... More Details >>
- No：22475
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:42
- Category： MELSEC iQ-R Series
Regarding comparison of Strings

Use the string comparison instructions LD$□, AND$□, OR$□. □contains =, <>, >, < =, <, > =. More Details >>
- No：39355
- Release Date：2023/02/15 13:03
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Displaying devices in GX Works2

Yes. The device use list also displays the devices used for specifying digits, such as "K4M0" (including M1, M2, or others). More Details >>
- No：22942
- Release Date：2018/09/03 17:30
- Category： Engineering Software

41-50 of Total 983

Inquiries

page top