You cannot select the item while the programmable controller is being monitored. Execute [Close all windows] of [Window]

Global and local labels have the following differences. Global Label ・This label is available to all programs in the pro

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional bat

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameter

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file reg

File registers "R" use the block switching method. The number of file register points used are divided and specified in

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

41-50 of Total 1023

prev 5 / 103page next

I cannot select [Transfer Setup] in GX Developer because it is displayed in gray.

You cannot select the item while the programmable controller is being monitored. Execute [Close all windows] of [Window] from the tool bar, and check if Tra... More Details >>
- No：22955
- Release Date：2018/09/03 17:31
- Update：2018/09/25 12:11
- Category： Engineering Software
Regarding understanding the differences between Global and Local Labels

Global and local labels have the following differences. Global Label ・This label is available to all programs in the project. ・You can also allocate any d... More Details >>
- No：44622
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the "S/S" terminal.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit the "0V" and "input X***". For sou... More Details >>
- No：22286
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:39
- Category： MELSEC iQ-F Series , CPU Module , I/O Module
Latch (backup) areas in the data register (D) and extended register (R) of the FX3U/FX3UC series

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on the parameter setting, refer to the... More Details >>
- No：24699
- Release Date：2019/02/27 08:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication
How to change the keeping (latched device data) range (FX3G/FX3GC)

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional battery is not used] The keeping ran... More Details >>
- No：22260
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:52
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
- Category： CPU Module , Engineering Software
Error code "2401" in QCPU

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file register. The cause of the error is th... More Details >>
- No：22535
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:46
- Category： MELSEC-Q Series
Difference between R and ZR

File registers "R" use the block switching method. The number of file register points used are divided and specified in units of 32k points. When multiple ... More Details >>
- No：22512
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:29
- Category： MELSEC-Q Series

41-50 of Total 1023

Inquiries

page top