Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (posi

Using the VPN (Virtual Private Network)*1 connection service enables the communications. VPN is a technology that conne

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurato

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

A comparison result is held even after the command input turns off. The remaining comparison result can be cleared by us

I/O signals and buffer memory addresses need to be changed but data communications can be conducted using a FROM/TO inst

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple sta

You do not have to change the device numbers for each station number in the initial setting procedure registration windo

Yes. A commercial SD memory card can be used. (32 GB max.)Connectable SD memory cards that passed our operation check ar

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (B

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

491-500 of Total 1023

prev 50 / 103page next

Parameter setting of FX3U-1PG

Whether the positioning parameter is used or the extension positioning parameter is used can be selected in BFM#32 (positioning parameter selection). Select ... More Details >>
- No：24917
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Positioning Control
Accessing the FX3U-ENET-ADP Ethernet communication special adapter at remote locations from GX Works2 via Internet

Using the VPN (Virtual Private Network)*1 connection service enables the communications. VPN is a technology that connects networks by encrypting the commun... More Details >>
- No：24908
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Network/Communication
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-L (for Ethernet communications)

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurator-EN-L can be downloaded from Mitsubi... More Details >>
- No：24869
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Main Unit , High-Speed Counting
Comparison result of the CMP instruction

A comparison result is held even after the command input turns off. The remaining comparison result can be cleared by using the RST or ZRST instruction. More Details >>
- No：24692
- Release Date：2019/02/27 08:56
- Category： MELSEC-F Series
Using a FROM/TO instruction after AJ71UC24 is replaced with QJ71C24N

I/O signals and buffer memory addresses need to be changed but data communications can be conducted using a FROM/TO instruction and X/Y signals. More Details >>
- No：23017
- Release Date：2018/09/03 17:31
- Category： Network related products
Link register assignments in MELSECNET/10 networks

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple stations as write areas. Following th... More Details >>
- No：22971
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:24
- Category： Network related products
Device numbers set in the initial setting procedure registration window of the CC-Link remote device station

You do not have to change the device numbers for each station number in the initial setting procedure registration window. Example) When the AJ65SBT2B-64A... More Details >>
- No：22949
- Release Date：2018/09/03 17:30
- Update：2018/09/25 11:05
- Category： Engineering Software
Use of commercial SD memory cards

Yes. A commercial SD memory card can be used. (32 GB max.)Connectable SD memory cards that passed our operation check are listed in the technical bulletin. More Details >>
- No：22801
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Number of points used for I/O assignment of LCPU built-in I/O function

X00 to X0F and Y00 to Y07 are sorted for each function. For more details, refer to "MELSEC-L CPU Module User's Manual (Built-In I/O Function)". More Details >>
- No：22762
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series

491-500 of Total 1023

Inquiries

page top