The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan.

Index modification cannot be used for labels. To set index modification, use actual devices as the target devices.

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Bloc

The units of send data and receive data are shown below. - Fixed buffer data communications with the "Procedure Exist

No, you do not have to set the network range assignment parameters for slave stations. By setting the network range assi

All stations communication error of a slave station.When POWER of the slave station is off, check if 24 V DC has been su

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the D

FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2.

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

501-510 of Total 1023

prev 51 / 103page next

Behavior of special relay in offline simulation

The constant scan initial value of GX Simulator is 100 ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set the consta... More Details >>
- No：22922
- Release Date：2018/09/03 17:30
- Update：2018/09/22 16:39
- Category： Engineering Software
Index modification in function blocks

Index modification cannot be used for labels. To set index modification, use actual devices as the target devices. More Details >>
- No：22930
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Refresh timing of bit data and word data in the same CC-Link station

Cyclic data is sometimes separated into new and old data by two words (32 bits) with auto refresh timing. Checking "Block data assurance per station" of the ... More Details >>
- No：23058
- Release Date：2018/09/03 17:31
- Category： Network related products
Data length for fixed buffer data communications by QJ71E71

The units of send data and receive data are shown below. - Fixed buffer data communications with the "Procedure Exist" control method: Words - Fixed buff... More Details >>
- No：23061
- Release Date：2018/09/03 17:31
- Update：2018/09/26 11:17
- Category： Network related products
Parameter setting of CC-Link IE Field Network

No, you do not have to set the network range assignment parameters for slave stations. By setting the network range assignment parameters for a master statio... More Details >>
- No：23066
- Release Date：2018/09/03 17:31
- Category： Network related products
Cause to turn on the ERR LED of a CC-Link master module

All stations communication error of a slave station.When POWER of the slave station is off, check if 24 V DC has been supplied.When POWER is on, check the st... More Details >>
- No：23079
- Release Date：2018/09/03 17:31
- Category： Network related products
Measurement of the counter in the MC (master control) circuit

When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
- No：24910
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit
Differences between the FX3UC-32MT-LT and the FX3UC-32MT-LT2

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the DIP switch. For the FX3UC-32MT-LT2, th... More Details >>
- No：24956
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Main Unit , Network/Communication
Adding FX3U series expansion boards to an FX3UC series main unit

FX3U series expansion boards can be added to FX3UC-32MT-LT and FX3UC-32MT-LT2. More Details >>
- No：24963
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit

501-510 of Total 1023

Inquiries

page top