Remedy to an error message when performing online change in LCPU

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash ROM). Therefore, additional online cha... More Details >>

How to use PWM output of LCPU built-in I/O

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction". More Details >>

How to read comments in the standard ROM with GX Works2

Select [Target Memory] -> [Standard ROM] in the Read from PLC window. More Details >>

PLC write not possible due to memory overload

If comments cannot be stored in the program memory, write them in the standard ROM or a memory card. Calculate the memory capacity in GX Works2 or GX Develo... More Details >>

How to check scan time

SD520 stores the current scan time in 1 ms units. More Details >>

Unable to select [Transfer Setup]

If a circuit is being monitored or a monitor window such as the device batch monitor window is open, [Transfer Setup] on the menu is grayed out. Select [Wi... More Details >>

GX Simulator in GX Works2 disk

The simulation function is included in GX Works2.For more details of the functions of GX Work2, refer to GX Works2 Version 1 Operating Manual (Common). More Details >>

Regarding Tag communication support of FX5-ENET/IP

Class1 communication of FX5-ENET/IP is instance communication. Tag communication is not supported. More Details >>

Regarding the data link program of FX5-CCL-MS

Since the FX5-CCL-MS has a link refresh setting, there is no need for a program to read and write data to each station. More Details >>

Regarding PDO Mapping Settings

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration settings from the FX5-CCLGN-MS Basic Set... More Details >>