Using devices assigned as local labels in another program (GX Works2)

No.To read from another program, assign the devices as global labels. More Details >>

Setting for sequentially inputting device comments in GX Works2

Select [Tool]-> [Options]-> [Program Editor] -> [Ladder/SFC] -> [Enter ladder] from the menu, and set [Enter label comment and device comment]... More Details >>

Link register assignments in MELSECNET/10 networks

For any type of MELSECNET network (II, /10, and H), B and W devices with the same number cannot be used for multiple stations as write areas. Following th... More Details >>

CC-Link IE Controller cable standard

Use the cables that meet the IEC60793-2-10 Types A1a.1 optical fiber standard. The connectors are LC (duplex) connectors. Two cores are required.The core di... More Details >>

Order in which a CC-Link master module and slave stations are connected

There is no restriction on the positions of a master station and slave stations where they are connected. (Stations are not required to be connected in order... More Details >>

Whether or not multiple QJ72LP25-25 modules can be mounted

No, only a single QJ72LP25-25 can be mounted (and is to be mounted on the CPU slot on a main base unit). More Details >>

Mixing line topologies with star topologies in the CC-Link IE Field Network　

Line topologies and star topologies can be mixed. More Details >>

MX Component's license

One license is required for each personal computer as a rule. More Details >>

Parameter settings required to use the MODBUS(R) interface module as a slave station

If preset initial values are used, parameters do not need setting.If changing the basic parameter or MODBUS(R) device assignment parameter, use a sequence pr... More Details >>

Setting of "Target MODBUS(R) device head number"

Set "(Last five digits of actual device number) - 1" for the Target MODBUS(R) device head number.Example) For the holding register 400018, set "17". More Details >>