When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earli

Multiple connections can be established by using a switching hub.

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor &gt

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file reg

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to chec

In the FX3U/FX3UC series, the bit specification of the data register is possible. (Example) D0.7→7th bit in D0 For the

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool,

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

51-60 of Total 1023

prev 6 / 103page next

Regarding handling multiple executions of ADPRW Instructions

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earlier is completed and communication by ... More Details >>
- No：39354
- Release Date：2023/02/15 10:17
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the method to connect with multiple devices via Ethernet port

Multiple connections can be established by using a switching hub. More Details >>
- No：22321
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:26
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Regarding how to clear simple CPU communication function errors

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU Communication Diagnostic" in GX Work... More Details >>
- No：40049
- Release Date：2023/08/25 09:06
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding how to Monitor Buffer Memory Values

You can monitor buffer memory values in the Ladder Editor by setting in GX Works3 >Tools >Options > Monitor > Common Item > Monitor Buffer Mem... More Details >>
- No：39324
- Release Date：2023/01/12 16:56
- Category： MELSEC iQ-F Series , CPU Module
Error code "2401" in QCPU

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file register. The cause of the error is th... More Details >>
- No：22535
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:46
- Category： MELSEC-Q Series
How to reset M8004 (Error occurrence)

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to check the error In the FX3S/FX3G/FX3GC/FX... More Details >>
- No：22280
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Turning on a bit in the data register

In the FX3U/FX3UC series, the bit specification of the data register is possible. (Example) D0.7→7th bit in D0 For the other types of MELSEC-F programmable... More Details >>
- No：22275
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the differences between Latches (1) and (2)

Whether the latch range is set by default is different. ・Latch (1) — Latch range is set by default. This can be changed at any time. ・Latch (2) — No latch ... More Details >>
- No：39351
- Release Date：2023/02/15 13:08
- Update：2024/08/19 09:54
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Communication setting methods when the FX3U-232-BD is used

The non-protocol communication can be set by the following two methods: (1) setting parameters using a programming tool, such as GX Works2, or (2) writing da... More Details >>
- No：24773
- Release Date：2019/02/27 15:24
- Category： MELSEC-F Series , Engineering Software , Network/Communication

51-60 of Total 1023

Inquiries

page top