Writing comments to the standard ROM in Q series

To write in the standard ROM, select [Online] -> [Write to PLC] (Flash ROM) More Details >>

Memory allocation for online change

The scan time may be substantially longer. Continue the operation if there is no problem with the longer scan time. More Details >>

File register setting window

No. More Details >>

Ethernet communication after the replacement of an external device

Personal computers have different MAC addresses and an Ethernet module hold a MAC address. Hence the MAC address that the Ethernet module currently holds is ... More Details >>

Intelligent function module settings in GX Works2

Modules do not need setting in GX Works2 if not selectable from "Module Selection" in the "New Module" window for intelligent function module settings. More Details >>

NTP compatibility of the SNTP function of a built-in Ethernet port QCPU

Because NTP is compatible with SNTP, you can use an NTP server for the time setting. More Details >>

Hardware setting for using Q series extension base units

You need to set the number of extension base units with the connector for setting the number of extension base units.For details, refer to the following.SH-0... More Details >>

Remedy to an error message when performing online change in LCPU

After data is written to the program cache memory (SRAM), it is automatically transferred to the program memory (flash ROM). Therefore, additional online cha... More Details >>

Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>

Use of commercial SD memory cards

Yes. A commercial SD memory card can be used. (32 GB max.)Connectable SD memory cards that passed our operation check are listed in the technical bulletin. More Details >>