The receive data length of the variable is specified in bytes.

- T-branch T-branch is a connection type that branches one line from a main line. To establish a T-branch CC-Li

General-purpose Ethernet cables that meet the 1000BASE-T standard (category 5e or higher) can be used. We recommend doub

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for Q

Install the latest version again. Check "Structured Text (ST) Language Programming Function" and install it.

Use L series CPU modules whose first 5 digits of the serial number are "13072" or later.

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2

The bits 0 to F of the special register SD1284 (Open request signal) correspond to the connection numbers 1 to 16. When

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows wh

The built-in Ethernet port in the L series is compatible only with the QnA-compatible 3E frame. The 4E frame is not supp

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

611-620 of Total 1023

prev 62 / 103page next

Unit of the receive data length used by the QJ71C24N series pre-defined protocol support function

The receive data length of the variable is specified in bytes. More Details >>
- No：23037
- Release Date：2018/09/03 17:31
- Category： Network related products
T-branch connection and star topology for CC-Link networks

- T-branch T-branch is a connection type that branches one line from a main line. To establish a T-branch CC-Link network, use the repeater module AJ65S... More Details >>
- No：23024
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:00
- Category： Network related products
Ethernet cables for the CC-Link IE Field Network

General-purpose Ethernet cables that meet the 1000BASE-T standard (category 5e or higher) can be used. We recommend double shielded cables. Recommended pro... More Details >>
- No：22989
- Release Date：2018/09/03 17:31
- Update：2019/06/27 15:47
- Category： Network related products
Precautions taken when QJ61BT11 is replaced with QJ61BT11N

Set the Network Parameter as shown below. (1) If QJ61BT11 is in the remote net mode, use the remote net Ver.1 mode for QJ61BT11N. (2) If QJ61BT11 is in the... More Details >>
- No：22967
- Release Date：2018/09/03 17:31
- Update：2018/09/25 13:20
- Category： Network related products
Opening a Structured Text program in GX Developer

Install the latest version again. Check "Structured Text (ST) Language Programming Function" and install it. More Details >>
- No：22862
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Restriction on the use of CPU when branch module and extension module are used

Use L series CPU modules whose first 5 digits of the serial number are "13072" or later. More Details >>
- No：22800
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
How to obtain connectors used for L series connector type I/O modules

A connector is not included. The connector is obtained by user. A6CON1 (soldering connector, straight out type), A6CON2 (crimp connector, straight out type),... More Details >>
- No：22791
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
SD1284 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1284 (Open request signal) correspond to the connection numbers 1 to 16. When the open request is sent, the corresp... More Details >>
- No：22784
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Loop disconnection detection function and heater disconnection detection function of temperature control module

The heater disconnection detection function monitors the heater current on the transistor output. If no current flows when the transistor is ON, it is consi... More Details >>
- No：22773
- Release Date：2018/09/03 17:30
- Update：2018/09/22 10:58
- Category： MELSEC-L Series
Use of 4E frame for built-in Ethernet port of LCPU

The built-in Ethernet port in the L series is compatible only with the QnA-compatible 3E frame. The 4E frame is not supported. More Details >>
- No：22761
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series

611-620 of Total 1023

Inquiries

page top