Using devices assigned as local labels in another program (GX Works2)

No.To read from another program, assign the devices as global labels. More Details >>

Link data from communication error stations in a CC-Link network

The remote input RX of the master station and the remote input RX and remote output RY of local stations clear/hold the data from an error station according ... More Details >>

Using a fixed latched (battery backed) type device as a general type device

Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>

Regarding Extended File Register (ER) file names

File names can not be changed. It is fixed to EXFILER.ERD. More Details >>

Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>

Unable to communicate via USB connection

Check the following points.(1) Transfer Setup is properly configured.(2) The USB driver is properly recognized. More Details >>

Replacing an AnS I/O module with a Q I/O module

Yes. More Details >>

Dragging and dropping function blocks in a structured project

Function blocks can be dragged and dropped into the program main body of the program block, and become available in the program. More Details >>

T-branch connection and star topology for CC-Link networks

- T-branch T-branch is a connection type that branches one line from a main line. To establish a T-branch CC-Link network, use the repeater module AJ65S... More Details >>

FX series with a built-in USB port

The FX3S,FX3G/FX3GC series hasa built-in USB port. More Details >>