It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/

The CANopen communication functions supported by the FX5-CCLGN-MS conform to the CiA402 CANopen profile, and can control

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use a

The inter-module synchronization function synchronizes the input or output timing of multiple I/O modules or intelligent

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and se

Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Settin

Always change the name of the Excel sheet on which MX Sheet is set in the "Change Sheet Name" dialog box.If the sheet na

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID c

To prevent an LED from turning on when an error occurs, set 0 to the relevant factor number setting area (4 bits for eac

When writing parameters first time, write the parameters for Ethernet (data of FX Configurator-RN-L) from a personal com

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

631-640 of Total 1023

prev 64 / 103page next

Regarding compatible version of CANopen communication function for PDO communication

It is necessary to use the following CPU module, FX5-CCLGN-MS, GX Works3 versions. FX5-CCLGN-MS・・・1.020 or later FX5U/FX5UC CPU module ・・・1.260 or later ... More Details >>
- No：44473
- Release Date：2024/07/02 19:06
- Category： MELSEC iQ-F Series , Network/Communication
Regarding CC-Link IE TSN CANopen Communication function

The CANopen communication functions supported by the FX5-CCLGN-MS conform to the CiA402 CANopen profile, and can control devices that support the CiA402 devi... More Details >>
- No：44474
- Release Date：2024/07/02 19:07
- Category： MELSEC iQ-F Series , Network/Communication
Regarding model name of CC-Link cables

The CC‐Link cables are being produced by various manufacturers, and no specific cable model is recommended. Please use a cable certified by the CC-Link Asso... More Details >>
- No：22330
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:53
- Category： MELSEC iQ-F Series , Network/Communication
Operations that can be performed with the MELSEC iQ-R series inter-module synchronization function

The inter-module synchronization function synchronizes the input or output timing of multiple I/O modules or intelligent function modules. The inter-... More Details >>
- No：22495
- Release Date：2018/09/03 17:28
- Update：2018/09/20 11:16
- Category： MELSEC iQ-R Series
Transparent function

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "GOT" for "PLC side I/F" and select "via GOT (direct coupled) tra... More Details >>
- No：22598
- Release Date：2018/09/03 17:29
- Update：2018/09/20 17:55
- Category： MELSEC-Q Series
Setting of Q series registers whose data is held when a power failure occurs

Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Setting" window) to hold the data when a po... More Details >>
- No：22601
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to copy a sheet used by MX Sheet

Always change the name of the Excel sheet on which MX Sheet is set in the "Change Sheet Name" dialog box.If the sheet name is changed in the Excel sheet dire... More Details >>
- No：22686
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to control MV value

You can use the output change upper limit value and the MV upper/lower limit limiter, the functions common to each PID control tag. Set the following parame... More Details >>
- No：22724
- Release Date：2018/09/03 17:29
- Update：2018/09/26 16:40
- Category： MELSEC-Q Series
Method to prevent the BAT.LED from turning on

To prevent an LED from turning on when an error occurs, set 0 to the relevant factor number setting area (4 bits for each) in SD207 to SD209. To disable the ... More Details >>
- No：22754
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Connecting the FX3U-ENET-L whose parameters have not been set

When writing parameters first time, write the parameters for Ethernet (data of FX Configurator-RN-L) from a personal computer to a programmable controller ma... More Details >>
- No：24790
- Release Date：2019/02/28 09:08
- Category： MELSEC-F Series , Network/Communication

631-640 of Total 1023

Inquiries

page top