The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "

･ The FX-USB-AW can be used for the programmable controllers except for the FX3S/FX3G/FX3GC series. ･ Since the FX3S/FX

A comparison result is held even after the command input turns off. The remaining comparison result can be cleared by us

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

Short between SDA and RDA and between SDB and RDB, and then connect them to + (Data-A) and - (Data-B) on the external de

If a repeater hub is used, 10BASE-T allows a maximum of four levels of cascade connections and 100BASE-TX allows a maxim

To open a GX Developer project, select [Project] -> [Open Other Data] -> [Open Other Project] from the menu of GX

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications"

The project can be read by selecting "Open other project" in GX Works2. - Function names for the GX Developer's Struct

The values are updated at the timing described below.- Current feed value: 1.8 ms- Machine feed value: 56.8 ms

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

641-650 of Total 1010

prev 65 / 101page next

Accessories of the FX3UC-16MR/DS-T and the FX3UC-16MR/D-T

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "FX2NC-100BPCB" power supply cable for... More Details >>
- No：25005
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Main Unit , Accessories
Connecting a USB interface of a personal computer to a programmable controller

･ The FX-USB-AW can be used for the programmable controllers except for the FX3S/FX3G/FX3GC series. ･ Since the FX3S/FX3G/FX3GC series have the built-in USB... More Details >>
- No：24707
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series
Comparison result of the CMP instruction

A comparison result is held even after the command input turns off. The remaining comparison result can be cleared by using the RST or ZRST instruction. More Details >>
- No：24692
- Release Date：2019/02/27 08:56
- Category： MELSEC-F Series
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
- Category： MELSEC-F Series , Engineering Software , Main Unit
RS-485 connection between LJ71C24 and an external device

Short between SDA and RDA and between SDB and RDB, and then connect them to + (Data-A) and - (Data-B) on the external device. More Details >>
- No：23048
- Release Date：2018/09/03 17:31
- Category： Network related products
Limitation on the number of levels of cascade connections when QJ71E71-100 is used

If a repeater hub is used, 10BASE-T allows a maximum of four levels of cascade connections and 100BASE-TX allows a maximum of two levels of cascade connectio... More Details >>
- No：23040
- Release Date：2018/09/03 17:31
- Category： Network related products
Opening SFC programs in GX Works2

To open a GX Developer project, select [Project] -> [Open Other Data] -> [Open Other Project] from the menu of GX Works2. More Details >>
- No：22878
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Writing QJ71C24N's parameters in GX Works2

The switch setting is written when CPU module's parameters are written. The settings of "Various Control Specifications" are written when intelligent functio... More Details >>
- No：22872
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Opening function block and Structured Text projects in GX Works2

The project can be read by selecting "Open other project" in GX Works2. - Function names for the GX Developer's Structured Text are different from those of ... More Details >>
- No：22864
- Release Date：2018/09/03 17:30
- Update：2018/09/22 14:28
- Category： Engineering Software
Update timing of QD75 current feed value and machine feed value

The values are updated at the timing described below.- Current feed value: 1.8 ms- Machine feed value: 56.8 ms More Details >>
- No：22689
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

641-650 of Total 1010

Inquiries

page top